*Official Benchmark Thread* - Post it here or it didn't happen :D

[Reciever]

11 hours ago, electrosoft said:

That is awesome news @Reciever! Know your worth and demand no less. Sometimes you have to be proactive and other times those around you will see and acknowledge your quality work and reward you thusly.

 

Now, just go ahead and finance that 5090..... 🤣

 

----------------------------------------------------------------------

The cable, according to TG data collected so far with the WVP2, is the primary issue regardless of MSI burning up or other makers like the PNY reported a day or two before this one. It was an Asrock PSU. In the comments:

 

He literally recommended over and over to his friend to get a WVP2 or at least a better 3.1 compliant PSU. With the WVP2 I am pretty sure he would have immediately seen a high imbalance on a pin or two but without a WVP2, or a 3.1 PSU that reports pin monitoring or an Astral. Without any of these reporting protections, you are basically piddling blindly  in the wind every time you use your 5090.

 

Before my WVP2 and MSI sending me an Ai 1600T PSU, I purposely used the included tentacle just in case for warranty claims. Switched to the MSI PSU and its included 12vhpwr cable keeping MSI completely responsible for the warranty chain and then added a WVP2 and their warranty on top of it for extra added support.

 

De8auer said they haven't had a single report of a WVP2 burning up yet from WVP2 to GPU connection.

 

At this point, anyone running a 5090 without a WVP2, a pin monitoring compatible PSU or at the least using the tentacle to keep any burning issues warranty claims valid are playing with fire.

 

-------------------------------------------------------------------------------------

 

 

 

 

 

 

Honestly pushing for more value is harder than I realized, have to push down the imposter syndrome and take a risk. Looks like they are targeting October 16th but they will have to agree to my salary demand.

-----------------------------------------------------------------------------------------

On another note, even if the 5090 was 2,000 I still wouldnt pick one up if I didnt have a WVP2 in hand to go with it, too much risk. It doesnt make sense to not have it. 


Looks like I get to drain the loop this weekend. One of the filters cracked (the glass) likely the cold air hitting it with the hotter water on startup? I have enough tubing thanks to @Mr. Fox recommending mcmaster I bought around 25 feet of tubing for exactly things like this. 

Was able to patch it and I do have a cup under the leak but for now it looks like it stopped leaking.

 

On 9/29/2026 at 1:28 AM, Mr. Fox said:

 

Congratulations, brother. I am glad that your dedication to excellence, faithfulness and hard work is finally being recognized.

 

Thanks Bro! It is Appreciated! 

[Mr. Fox]

6 hours ago, Reciever said:

Looks like I get to drain the loop this weekend. One of the filters cracked (the glass) likely the cold air hitting it with the hotter water on startup? I have enough tubing thanks to @Mr. Fox recommending mcmaster I bought around 25 feet

That's really strange. I've never had a filter crack before. I'm wondering if maybe it had a defect. Using the chiller has never affected mine and it gets close to freezing point.

[mattalienware]

Alienware 14 R1. 3DMark 11 score of 4,568.

 

Please let me know if this is good or bad for what the laptop is, lol.

 

This was my first time using 3DMark. I decided to use 3DMark 11 since my graphics card is on DX11 and that version of 3DMark is free. Benchmark was ran at my laptops native resolution of 1366x768p. Hopefully I have done it correctly.

 

Link to 3DMark results: https://www.3dmark.com/3dm11/17007367

Screenshots attached.

[Mr. Fox]

5 hours ago, mattalienware said:

Alienware 14 R1. 3DMark 11 score of 4,568.

 

Please let me know if this is good or bad for what the laptop is, lol.

 

This was my first time using 3DMark. I decided to use 3DMark 11 since my graphics card is on DX11 and that version of 3DMark is free. Benchmark was ran at my laptops native resolution of 1366x768p. Hopefully I have done it correctly.

 

Link to 3DMark results: https://www.3dmark.com/3dm11/17007367

Screenshots attached.

3DM11 is the GOAT benchmark. Good choice.

[Vasudev]

@Mr. Fox @Papusan I'm back to desktop after a small break of 15 years. The laptops don't cut anymore. Anyway I repurposed the RTX 4070 Super eGPU for Raptor Lake Refresh 14400f and measly 2x8GB DDR4 3200MTps, MSI bomber B760M AX211 WIFI mobo and 512GB SN3000 QLC drive as costs for DDR5 16GB 6400 has driven up to 500$ for basic ones and good ones sell for 1200$ per stick.I got them for 600$ including the case.

Too many issues with eGPU on windows 11 and stopped trusting Defender to go for Kaspersky Standard AV as I started getting few indie games and apps early for review for my youtube channel. All of the desktop are in test bench as I'm sick with HFM which my sister had couple of weeks ago.

Stock RM1 Cooler can't sustain 120W and 45C ambient. Tweaked few settings in TS and uploaded few unofficial DLSS 5 mod into Miles Morales (lot of artifacts indoor lights/env), NFS MW Redux (much more cleaner graphics/UI).