Meaker Posted May 4 Share Posted May 4 This sort of curve will do it. Not the same card just an example. It won't exceed the clock/voltage of where it goes flat. You can shift select and drag down all the values after the voltage you want to lower than your last value and it will auto flatten. my results: https://www.3dmark.com/spy/47636486 Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Maro97 Posted May 4 Share Posted May 4 5 hours ago, Meaker said: This sort of curve will do it. Not the same card just an example. It won't exceed the clock/voltage of where it goes flat. You can shift select and drag down all the values after the voltage you want to lower than your last value and it will auto flatten. my results: https://www.3dmark.com/spy/47636486 where did you get prema BIOS support 9900ks & rtx 3080 ? Link to comment Share on other sites More sharing options...
Meaker Posted May 5 Share Posted May 5 I got sent it after requesting and donating for it, we have worked together for a long time. 2 1 Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Raven Posted May 5 Share Posted May 5 15 hours ago, anassa said: Then dumb question, but you have gone through all the normal steps to unlock the voltage control? : https://steemit.com/gpu/@icryptomedianews/how-to-unlock-core-voltage-in-msi-afterburner I have done all of the things no changes at all. Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Raven Posted May 5 Share Posted May 5 6 hours ago, Meaker said: I got sent it after requesting and donating for it, we have worked together for a long time. What version did that end up being, Did it happen to include a 128GB + Thunderbolt ram fix? If yes, Anywhere I can donate and request a copy? 14 hours ago, Meaker said: This sort of curve will do it. Not the same card just an example. It won't exceed the clock/voltage of where it goes flat. You can shift select and drag down all the values after the voltage you want to lower than your last value and it will auto flatten. And no there are no changes too it, Even when trying to for example force less than 1V it still wont change, So either I'm doing something wrong, Or it's just not accepting it or something else is at play. Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Meaker Posted May 5 Share Posted May 5 https://www.3dmark.com/spy/47636486 Got it to 14k with a 14773 graphics score. 3 1 Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Raven Posted May 22 Share Posted May 22 What are your temps like at full load on that 3080 On 5/5/2024 at 6:37 PM, Meaker said: https://www.3dmark.com/spy/47636486 Got it to 14k with a 14773 graphics score. 1 Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Meaker Posted May 22 Share Posted May 22 2 hours ago, Raven said: What are your temps like at full load on that 3080 About 65C. Here are my steel nomad results: https://www.3dmark.com/sn/13726 Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Raven Posted May 22 Share Posted May 22 13 minutes ago, Meaker said: About 65C. Here are my steel nomad results: Not bad, What's it's over-all power draw after your shunt mod and before it? Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Meaker Posted May 23 Share Posted May 23 Did not measure it but the exact value will vary card to card. Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Raven Posted May 26 Share Posted May 26 So the panel on my machine got damaged in an unfortunate accident and has a small but annoying scratch on it, Entirely my fault, but this does mean it's time to buy a panel sooner rather than later. I was initially going to order https://www.panelook.com/B173ZAN06.C_AUO_17.3_LCM_overview_60027.html the 4k 144hz HDR1000 compliant panel from aliexpress but they have dissappeared I have found sellers selling https://www.panelook.com/B173ZAN03.3_AUO_17.3_LCM_overview_45254.html wich is 4k 120HZ no HDR but I can deal with that for a reasonable price. I think someone here is already running one of these as-well so It should just be a drop in and go Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Maro97 Posted May 27 Share Posted May 27 (edited) B173ZAN06.C is the best laptop led until this moment it's faster than B173ZAN03.3 it's 3ms G to G but B173ZAN03.3 120hz 4k is 8ms G to G and the color accuracy is best than 120hz led ..... i advice to buy B173ZAN06.C you can find it on ebay. dont forget to buy a 0.4 (signal interface pin pitch) 40 pin cable if you buy B173ZAN06.C but if you buy B173ZAN03.3 you will use 0.5m ( signal interface pin pitch) 40 pin cable 30cm length.. Edited May 27 by Maro97 .. Link to comment Share on other sites More sharing options...
Raven Posted May 27 Share Posted May 27 12 hours ago, Maro97 said: i advice to buy B173ZAN06.C you can find it on ebay. Perhaps for places that ship to EU or America but I can't find any that ship to Australia so I am probably going to go to the other one. Can you link a cable to use with the B173ZAN03.3 I would also like to know if there are any tear down guides for the Panel enclosure as I've never had to take it apart. Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD Link to comment Share on other sites More sharing options...
Maro97 Posted May 27 Share Posted May 27 Just found this amazing item on AliExpress. Check it out! $26.00 | Clevo P750/1DM P775 P770 P870 LCD cable for B156ZAN05.1 B173ZAN03.3 6.9 4K/120/144Hz B173HAN05.0/1/2 FHD/240/360Hz EDP 0.4/5mm https://a.aliexpress.com/_msi3UVc Send to the seller this photo and the name of led too 1 Link to comment Share on other sites More sharing options...
Developer79 Posted May 28 Share Posted May 28 My last test with RTX3080 Steel Nomad Light 1 Link to comment Share on other sites More sharing options...
Maro97 Posted May 28 Share Posted May 28 Hellblade 2 2 Link to comment Share on other sites More sharing options...
Developer79 Posted June 2 Share Posted June 2 Horizon Forbidden West: RTX3080 Its amazing graphics and performance 1 Link to comment Share on other sites More sharing options...
Maro97 Posted June 2 Share Posted June 2 yes it is 🙂 Link to comment Share on other sites More sharing options...
crz Posted June 3 Share Posted June 3 The RTX3080 has a turbo boost of up to 165 watts and does G-Sync work normally on any of the supported displays? Link to comment Share on other sites More sharing options...
runix18 Posted June 4 Share Posted June 4 9 hours ago, crz said: The RTX3080 has a turbo boost of up to 165 watts and does G-Sync work normally on any of the supported displays? No, it does not. Desktop - MSI B650 Tomahawk Wifi | AMD 7800X3D | 32 GB Trident Z5 Neo RGB 6000Mhz | MSI RTX 4070TI Suprim X | Alienware 27 AW2724DM 2K 165 Hz Gsync | Samsung 990 Pro Nvme - Boot | Other various storage | Windows 10 Pro x64 SOLD - Clevo P870DM-G | i9-9700K 4.5 Ghz on all cores (-50 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64 Link to comment Share on other sites More sharing options...
crz Posted June 4 Share Posted June 4 @runix18 thank you, in this case, this card can probably work completely correctly only at x170km, I'm a little surprised that even a similar SM model has problems in this regard. Link to comment Share on other sites More sharing options...
runix18 Posted June 4 Share Posted June 4 1 hour ago, crz said: @runix18 thank you, in this case, this card can probably work completely correctly only at x170km, I'm a little surprised that even a similar SM model has problems in this regard. The 15W bosst wont work because of missing GPU ACPI tables in Bios. Gsync is in the same boat due to missing specific Gsync cookies in bios (to validate the CPU + Display + GPU combo). If we can hope that someone skillfull enough will port from the KM bios what is necesary for a SM to have the same validated KM parts (CPU + display + GPU), meaning injecting the corect microcodes for CPU compatibility + and porting the necesary code from the GPU modules. On the P870 we will never have gsync with 2000S and 3000 series because of missing compatibility with CPU in the Gsync cokies. Desktop - MSI B650 Tomahawk Wifi | AMD 7800X3D | 32 GB Trident Z5 Neo RGB 6000Mhz | MSI RTX 4070TI Suprim X | Alienware 27 AW2724DM 2K 165 Hz Gsync | Samsung 990 Pro Nvme - Boot | Other various storage | Windows 10 Pro x64 SOLD - Clevo P870DM-G | i9-9700K 4.5 Ghz on all cores (-50 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64 Link to comment Share on other sites More sharing options...
crz Posted June 4 Share Posted June 4 @runix18 Yes, I have already heard and know about the limitations associated with the lack of the necessary code part in the bios for the SM model. Unfortunately for the P870 everything is also going down the same road and it would be really nice to get the RTX 3-series GPUs working correctly as a result. Link to comment Share on other sites More sharing options...
Maro97 Posted June 9 Share Posted June 9 RTX 4090 MXM 135w released 🙂 https://en.zrt-tech.com/product_details/137.html 1 Link to comment Share on other sites More sharing options...
Developer79 Posted June 14 Share Posted June 14 On 6/9/2024 at 10:19 AM, Maro97 said: RTX 4090 MXM 135w released 🙂 https://en.zrt-tech.com/product_details/137.html Hi, the part costs about 1400 USD without taxes and shipping with everything together 1500-1600USD! I'm curious to see who will be the first to get this card. You can't push the price of the card down because it doesn't come from Clevo. Smaller quantities etc... Secondly, the MXM pins are not all the same as on Clevo. A display cannot be switched on and various other pins are different. The 3.3V supply is also slightly different. So it's all a bit more work and only a test will show what works :-) Someone can send me the card for testing:-) Greetz from Germany 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now