Jump to content
NotebookTalk

Official Clevo P870TM-G Thread


ViktorV

Recommended Posts

3 hours ago, 1610ftw said:

The 4090 is so expensive that I would want to see something like a 50% increase over the 3080 that recently has come down in price a lot but that will be very difficult to achieve with a 135W power limit!

This increase is relatively unlikely. Maybe a third of it. Then there is the question of compatibility! A lot has to be done on the hardware side. I am in communication with the company regarding the problems!

Link to comment
Share on other sites

11 minutes ago, Developer79 said:

This increase is relatively unlikely. Maybe a third of it. Then there is the question of compatibility! A lot has to be done on the hardware side. I am in communication with the company regarding the problems!

 

A 50% increase should not be a problem with the card running at the usual 175W power limit and possibly even at 150 to 160W. The 3080 already had 16GB memory and is good for gaming at QHD resolutions so spending that much money for a ca 30% increase in performance strikes me as not that desirable especially for something that is not a plug and play solution.

Link to comment
Share on other sites

5 hours ago, Developer79 said:

This increase is relatively unlikely. Maybe a third of it. Then there is the question of compatibility! A lot has to be done on the hardware side. I am in communication with the company regarding the problems!

 

In any case, it will become much cheaper over time. Maybe by some miracle they will release a version for Clevo (it's almost impossible) or tell you what is needed for the initial functioning of this GPU.

Link to comment
Share on other sites

On 6/14/2024 at 10:03 PM, crz said:

In any case, it will become much cheaper over time. Maybe by some miracle they will release a version for Clevo (it's almost impossible) or tell you what is needed for the initial functioning of this GPU.

We will see. In any case, this card has slightly different pin assignments for certain pins. Of course you can mod the motherboard again. Probably nobody will buy this card for a Clevo model and it will all come to nothing. Of course, 16 lanes won't work in the P870xx either. 

P.S: If you want, you can send me this card and see how I can get it to work in the P870xx!!!

  • Like 1
Link to comment
Share on other sites

So I found a cheap 3080 and pulled the trigger and it should arrive very soon, Here's hoping one of my heatsinks works, I wouldn't of normally of pulled the trigger but it was cheap and I've recently gotten myself a nice bonus.

 

 

And with tax time around the corner it'll be time to get that panel.

 

Does anyone know what kind of screws the CPU Mount uses so I can get some replacements as they are unfortunately starting to round ou.

Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD 

Link to comment
Share on other sites

On 6/17/2024 at 8:22 PM, Raven said:

So I found a cheap 3080 and pulled the trigger and it should arrive very soon, Here's hoping one of my heatsinks works, I wouldn't of normally of pulled the trigger but it was cheap and I've recently gotten myself a nice bonus.

 

 

And with tax time around the corner it'll be time to get that panel.

 

Does anyone know what kind of screws the CPU Mount uses so I can get some replacements as they are unfortunately starting to round ou.

Can you briefly explain what you mean? I didn't understand your text.

Link to comment
Share on other sites

1 hour ago, Developer79 said:
On 6/18/2024 at 2:22 AM, Raven said:

Can you briefly explain what you mean? I didn't understand your text

Can you please point out the part you don't understand as the entire post is very clear and obvious.

 

 

Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD 

Link to comment
Share on other sites

On 6/17/2024 at 11:22 AM, Raven said:

So I found a cheap 3080 and pulled the trigger and it should arrive very soon, Here's hoping one of my heatsinks works, I wouldn't of normally of pulled the trigger but it was cheap and I've recently gotten myself a nice bonus.

 

 

And with tax time around the corner it'll be time to get that panel.

 

Does anyone know what kind of screws the CPU Mount uses so I can get some replacements as they are unfortunately starting to round ou.

 

Which heatsink do you have? Did you had to make any modification to it in order to fit the RTX3080?

CLEVO PT870TM1-G || i7 8700K || 32 GB 2400MHz || Nvidia GTX 1080 x 2 || 1440p @120Hz
HP ZBOOK 17 G3 || Xeon E3-1535M v5 || 16 GB 2400MHz || Nvidia Quadro GTX M5000M || 1080p @60Hz
DELL PRECISION M6400 || C2Q QX9300 || Nvidia Quadro FX3700M || 1200p @60Hz || RETIRED

LG 27UK850-W || 2160p @60Hz || AMD Freesync
OC.net profile (luisxd)

Heatware profile (luisxd)

Link to comment
Share on other sites

I was about to trade my P870 for a desktop combo, but I just found out I can put a RTX3080 MXM on it, I had to cancel the deal lol...

 

According to the thread it should work right away with stock CLEVO BIOS, so I'm clear on that.

 

But I'm confused about the heatsink, do I have to make any modification or additional mods to the dual vapor chamber heatsink to make it fit? or does it fit right away?

 

I was looking at this GPU: Clevo X170KM NVIDIA RTX 3080 GN20-E7-A1 16GB

CLEVO PT870TM1-G || i7 8700K || 32 GB 2400MHz || Nvidia GTX 1080 x 2 || 1440p @120Hz
HP ZBOOK 17 G3 || Xeon E3-1535M v5 || 16 GB 2400MHz || Nvidia Quadro GTX M5000M || 1080p @60Hz
DELL PRECISION M6400 || C2Q QX9300 || Nvidia Quadro FX3700M || 1200p @60Hz || RETIRED

LG 27UK850-W || 2160p @60Hz || AMD Freesync
OC.net profile (luisxd)

Heatware profile (luisxd)

Link to comment
Share on other sites

20 hours ago, luisxd said:

I was about to trade my P870 for a desktop combo, but I just found out I can put a RTX3080 MXM on it, I had to cancel the deal lol...

 

According to the thread it should work right away with stock CLEVO BIOS, so I'm clear on that.

 

But I'm confused about the heatsink, do I have to make any modification or additional mods to the dual vapor chamber heatsink to make it fit? or does it fit right away?

 

I was looking at this GPU: Clevo X170KM NVIDIA RTX 3080 GN20-E7-A1 16GB

I think @Developer79 made custom brackets. I have the P870DM3-G and the RTX 3080 mounted to the MOBO but the big heatsink was not aligned for the screw holes so I didn't screw the heatsink to it. Bot I left the GTX 1080 in the 2nd slot and that is fully mounted properly. The main issue was a gap in the 3080 not touching the heatsink. I heatgunned an old M18xr2 GPU heatsink and the copperplate was 1mm thick and fit perfect, thermal pasted both sides and is running perfect. Both cards are always within 1 or 2 degrees temp from each other no matter which card I am loading up

  • Like 1

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

5 minutes ago, aldarxt said:

I think @Developer79 made custom brackets. I have the P870DM3-G and the RTX 3080 mounted to the MOBO but the big heatsink was not aligned for the screw holes so I didn't screw the heatsink to it. Bot I left the GTX 1080 in the 2nd slot and that is fully mounted properly. The main issue was a gap in the 3080 not touching the heatsink. I heatgunned an old M18xr2 GPU heatsink and the copperplate was 1mm thick and fit perfect, thermal pasted both sides and is running perfect. Both cards are always within 1 or 2 degrees temp from each other no matter which card I am loading up

 

Can you share some pictures? thanks

  • Thumb Up 1
Link to comment
Share on other sites

On 6/26/2024 at 10:47 PM, luisxd said:

I was about to trade my P870 for a desktop combo, but I just found out I can put a RTX3080 MXM on it, I had to cancel the deal lol...

 

According to the thread it should work right away with stock CLEVO BIOS, so I'm clear on that.

 

But I'm confused about the heatsink, do I have to make any modification or additional mods to the dual vapor chamber heatsink to make it fit? or does it fit right away?

 

I was looking at this GPU: Clevo X170KM NVIDIA RTX 3080 GN20-E7-A1 16GB

 

19 hours ago, aldarxt said:

I think @Developer79 made custom brackets. I have the P870DM3-G and the RTX 3080 mounted to the MOBO but the big heatsink was not aligned for the screw holes so I didn't screw the heatsink to it. Bot I left the GTX 1080 in the 2nd slot and that is fully mounted properly. The main issue was a gap in the 3080 not touching the heatsink. I heatgunned an old M18xr2 GPU heatsink and the copperplate was 1mm thick and fit perfect, thermal pasted both sides and is running perfect. Both cards are always within 1 or 2 degrees temp from each other no matter which card I am loading up

 

18 hours ago, lsflp said:

 

Can you share some pictures? thanks

Once again for clarification:
In order to install the RTX3080/70/60 MXM in the P870xx, the mounting between the heatsink and the graphics card must of course be modified. As everyone now knows, the mounting holes of the RTX30xx MXM are no longer identical to those of the RTX20xx/RTX20xxSuper/GTX10xx/GTX9xx MXM series! I have developed adapters especially for the Vapourchamber which have been working for a good 2 years in the 3 version. Of course, the Vapourchamber must also be machined accordingly with the milling machine. This whole topic motivated me to develop it myself because the Vapourchamber is the best air cooling system for laptops. Of course, the other heatsinks that have come out for the RTX20xx / GTX10xx also work. But with the Vapourchamber, the P870xx is the best cooled laptop ever at maximum gaming performance. Only water cooling is better, of course!

 

Addition:
I have now also perfected the bios detection of the RTX30xx series.
Many thanks to RUNIX for the tips.
You don't have to have it, but it's nice if you know how:-)

I can leave a picture to see what the Vapourchamber with 2x RTX3080 in the P870xx looks like. But that was just a test because of SEMI-SLI. Otherwise I only ever install 1x RTX30xx MXM in the P870xx!

 

Greetz:-)

RTX3080_11.thumb.jpg.d09ab16b98eb9cdbb2a8de5024dddfea.jpg

Almost 2 years ago is the photo!!!

  • Like 1
Link to comment
Share on other sites

1 hour ago, aldarxt said:

I think @Developer79 made custom brackets. I have the P870DM3-G and the RTX 3080 mounted to the MOBO but the big heatsink was not aligned for the screw holes so I didn't screw the heatsink to it. Bot I left the GTX 1080 in the 2nd slot and that is fully mounted properly. The main issue was a gap in the 3080 not touching the heatsink. I heatgunned an old M18xr2 GPU heatsink and the copperplate was 1mm thick and fit perfect, thermal pasted both sides and is running perfect. Both cards are always within 1 or 2 degrees temp from each other no matter which card I am loading up

I'd like to see pictures as well if possible, thank you.

CLEVO PT870TM1-G || i7 8700K || 32 GB 2400MHz || Nvidia GTX 1080 x 2 || 1440p @120Hz
HP ZBOOK 17 G3 || Xeon E3-1535M v5 || 16 GB 2400MHz || Nvidia Quadro GTX M5000M || 1080p @60Hz
DELL PRECISION M6400 || C2Q QX9300 || Nvidia Quadro FX3700M || 1200p @60Hz || RETIRED

LG 27UK850-W || 2160p @60Hz || AMD Freesync
OC.net profile (luisxd)

Heatware profile (luisxd)

Link to comment
Share on other sites

12 hours ago, luisxd said:

I'd like to see pictures as well if possible, thank you.

Don't bother asking, everytime I have mentioned or asked for pictures or anyhting else I never get a response out of them that actually involves or includes those, They've also mentioned they had them for sale/developed them but I still havn't  seen them so I honestly don't know.

 

On 6/27/2024 at 2:38 AM, luisxd said:

Which heatsink do you have? Did you had to make any modification to it in order to fit the RTX3080?

I currently have 3 heatsinks and will modify one if I must in order to get it to work, The main concern is the Bios, Anything else is secondary.

 

 

It's currently still in transport as-well, everything takes forever to get too australia.

  • Thumb Up 1

Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD 

Link to comment
Share on other sites

2 hours ago, Raven said:

Don't bother asking, everytime I have mentioned or asked for pictures or anyhting else I never get a response out of them that actually involves or includes those, They've also mentioned they had them for sale/developed them but I still havn't  seen them so I honestly don't know.

 

I currently have 3 heatsinks and will modify one if I must in order to get it to work, The main concern is the Bios, Anything else is secondary.

 

 

It's currently still in transport as-well, everything takes forever to get too australia.

i DONT HAVE PICTURES OF THE CUSTOM BRACKETS

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

16 hours ago, Developer79 said:

 

 

Once again for clarification:
In order to install the RTX3080/70/60 MXM in the P870xx, the mounting between the heatsink and the graphics card must of course be modified. As everyone now knows, the mounting holes of the RTX30xx MXM are no longer identical to those of the RTX20xx/RTX20xxSuper/GTX10xx/GTX9xx MXM series! I have developed adapters especially for the Vapourchamber which have been working for a good 2 years in the 3 version. Of course, the Vapourchamber must also be machined accordingly with the milling machine. This whole topic motivated me to develop it myself because the Vapourchamber is the best air cooling system for laptops. Of course, the other heatsinks that have come out for the RTX20xx / GTX10xx also work. But with the Vapourchamber, the P870xx is the best cooled laptop ever at maximum gaming performance. Only water cooling is better, of course!

 

Addition:
I have now also perfected the bios detection of the RTX30xx series.
Many thanks to RUNIX for the tips.
You don't have to have it, but it's nice if you know how:-)

I can leave a picture to see what the Vapourchamber with 2x RTX3080 in the P870xx looks like. But that was just a test because of SEMI-SLI. Otherwise I only ever install 1x RTX30xx MXM in the P870xx!

 

Greetz:-)

Yes, that big fat Vapourchamber is the best, thats why I am not modifying it. I left the 1080 in 2nd slot to help hold it down tight since there are no screws in the 3080. The 1mm copper plate seems to be working well, even though nothing is holding it in place but I am not running up and down the stairs with this heavy Clevo LOL. If I took out the 1080 and wanted to install NVME adapter I would be more interested in those adapters, but this laptop I am keeping in the coral, not like I did my m18xr2, opening it up over 100 times causing the most wear and tear. This P870DM3-G is the best in the world #1 cause it is in my house, #2 cause I really like it and #3 cause it has alot of upgrade potential, but it is good as it is right now, @Meaker has water cooling and shunt mod and that laptop can't be beat. Mine is running problem free and am going to try to leave it that way, until a significant upgrade shows up (sometimes I just can't stop myself)

  • Thumb Up 1

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

On 6/26/2024 at 4:47 PM, luisxd said:

I was about to trade my P870 for a desktop combo, but I just found out I can put a RTX3080 MXM on it, I had to cancel the deal lol...

 

According to the thread it should work right away with stock CLEVO BIOS, so I'm clear on that.

 

But I'm confused about the heatsink, do I have to make any modification or additional mods to the dual vapor chamber heatsink to make it fit? or does it fit right away?

 

I was looking at this GPU: Clevo X170KM NVIDIA RTX 3080 GN20-E7-A1 16GB

I bought this 3080

Image00001.jpg

  • Thumb Up 1

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

25 minutes ago, Maro97 said:

works fine or not ? and if you need the heatsink for this beast you can contact with Developer79 🙂

This is how good it works   https://www.3dmark.com/3dm/112434033

I would have a higher place but some moron https://www.3dmark.com/sn/147293 RaIdZz

is taking up like 20 spots   with all his scores so I get knocked down to 31. I would be like 11

And @Meaker still got #1

  • Thumb Up 2

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

Actually this RaIdZz  has an I9-11900k and can"t beat an I9-9900ks, he should be embarrassed and remove all his scores. I have an I9-9900k so it should be as expected to beat the I9-9900 series but he has failed!

  • Thumb Up 1

Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080

Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 

Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000

Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D

Precision m6700 i7-3840QM-16GB DDR3-GTX 970M 
Precision m4700 i7-3840QM-16GB DDR3-T2000M

HP ZBook 17 G6   i7 9850H-32GB DDR4-RTX4000maxQ

GOBOXX SLM  G2721-i7-10875H RTX 3000-32GB ddr4

 

Link to comment
Share on other sites

3 hours ago, aldarxt said:

Actually this RaIdZz  has an I9-11900k and can"t beat an I9-9900ks, he should be embarrassed and remove all his scores. I have an I9-9900k so it should be as expected to beat the I9-9900 series but he has failed!

 

You got to look at the Leaderboard view then everybody will only be there once and you got 9th place:

 

https://www.3dmark.com/search#advanced?test=sw DX&cpuId=&gpuId=1372&gpuCount=0&gpuType=ALL&deviceType=ALL&storageModel=ALL&showRamDisks=false&memoryChannels=0&country=&scoreType=overallScore&hofMode=true&showInvalidResults=false&freeParams=&minGpuCoreClock=&maxGpuCoreClock=&minGpuMemClock=&maxGpuMemClock=&minCpuClock=&maxCpuClock=

 

CPU does not matter any more as this is a GPU only score.

 

I still think it is better to just use Time Spy as they have about 100 times as many scores so this gives a better idea of how good the 3080 really works:

 

https://www.3dmark.com/search#advanced?test=spy P&cpuId=&gpuId=1372&gpuCount=0&gpuType=ALL&deviceType=ALL&storageModel=ALL&showRamDisks=false&memoryChannels=0&country=&scoreType=graphicsScore&hofMode=true&showInvalidResults=false&freeParams=&minGpuCoreClock=&maxGpuCoreClock=&minGpuMemClock=&maxGpuMemClock=&minCpuClock=&maxCpuClock=

 

With a 150W power limit it probably will be very hard to crack the top 100 in that ranking.

  • Thumb Up 1
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use