solidus1983

Does your TV/External Monitor have any modes on it like Game mode etc or any image processing. If so TURN them off if its only on the external screen your seeing the stuttering on. If however your seeing stuttering on both screens its going to be either the Cable to the external screen or its a nvidia driver issue, the latter can be tested by downgrading the GPU driver after a DDU clean back to the 472 branch of drivers. Also are you using Slimmed drivers or the drivers directly from Nvidia? if the former try the latter if the latter try the former.

60c is totally fine on NVME bud, its not as if your going to hit the trip point unless your writing 1's and 0's 24/7/365 without a break. See with SSD's the NAND loves to be warm whilst the controller likes to be chilled, a fine balance however there is a trick as i bet you place the thermal pad across the whole nvme ssd. There is a slight difference in height between the NAND and controller in fact the controller is slightly higher then the NAND what i would normally do is just cover each sperate and use a slight thicker pad on the NAND, if you want full coverage. Else like i have done with my current SSD's just have the controller connected to the heatsink.

Keyboard anchors???? Do you mean the posts or the magnets? When you say firmware do you mean the EC firmware as 1.07.07 is the latest UEFI Firmware Bios update and the current stable EC is 1.07.03 right now (Yes there is a 1.07.04 EC Firmware update but even i have gone back to 1.07.03 due to shutdowns whilst on 1.07.04). As for the NVME SSD's if they are PCI-E 4.0 NVME's they are toasty by default, you could if the heatsinks are not helping try a heatsink mod to connect it to the the fan some how with another copper pipe up towards the fin array on the side. Else if you have the sticker still on might help removing that but that will void warranty that i know for sure. Heck even my PCI-E 3.0 NVME hits 63-68c when on full tilt which is in the PCI-E 4.0 slot, however the PCI-E 3.0 SSD in the PCI-E 3.0 slots hits tops 58c which is the same as the SATA M.2 SSD's i use. If your PCI-E 4.0 NVME SSD is below 70c its fine.

@crossshot welcome to the site bud glad to see you, Could you DM me the older EC and BIOSes please making a collection myself to make in to packs for easy flashing, for the not so savy people. This includes removing the DMI Edits that older XMG bioses did as well.

Oh god get ready to laugh at mine. So here we go. ISP: SSE Vodaphone FTTC 50/5 sync on 80/20 Package Modem: Zytel VMG4005-B50A (VDSL2 with line bonding support) Router: Linksys WRT32X with my personal custom OpenWRT firmware (Yep i know) Server: Seed Odyssey x86 8GB, 1.25TB Storage running Proxmox 7.1 running 4 VM's, 1 Windows VM for Driver mods, 1 Linux Container for OpenWRT Compiling, 1 Linux VM for Docker/Portainer which hosts what is in the screenshots minus Nextcloud and another Linux VM for Nextcloud. Server runs everything from VPN to Pihole Unbound DNS with DoH and DNSEC, which has a 4 Million block list for Malware, Trojan, Gambling, Adult Content, Crypto Miners, Telemetry.

@Jaggy84 How's the throttle stop coming along? Hopefully when i get the 11700KF it will be the same as when i was using an 6700HQ in terms of setting up throttle stop.

I myself am a Pre-Spreader type of guy but some times use the line method on Rectangle Dies and Blob + X on Squared Dies.

Huawei Mate 20 Lite's and have been for a while now. Looking to get something newer but Audio Jack is a must as well as Micro-SD Storage. which seems to have gone the way of the dodo.

Yeah Kryonaut Extreme performs much better then Kryonuat, also much more cleaner. I purchased a small amount at first and it was so much better i purchased a tub of it. I might when funds are available after upgrades do a shoot out as some of the pastes in the 14W/m*k range or above has peeked my interest. As for ICD i would take that out CPU Dies and IHS's will thank you for that.

You can add Thermal Grizzly Kryonaut Extreme to that list currently running that stuff right now, its pink instead of grey! Spec Sheet: https://www.thermal-grizzly.com/images/downloads/TG-Datasheet-KryonautExtreme-EN.pdf Product Page: https://www.thermal-grizzly.com/en/products/359-kryonaut-extreme-en Rating: 14,2 W/m*K

@Jaggy84 How did your Firmware flash go bud?

@Jaggy84 Check you DM's!

Sweet the instructions will be in the zip file and it includes not only how to flash bios with 2 sticks but also 4 sticks. G1 is for 2 Sticks and G2 is for 4 sticks as your on EC 1.07.05 you don't need to update that, as thats the latest as far as i know. Hopefully the instructions will help you through the whole process. Once i have the link up for you it will be set to expire 4 days after.

Yep it sure is!

Nope after testing Windows 11 on a VM and on my Lenovo R61e, its not touching any system in my house at all. If its forced i have my Linux OS ready and waiting for me to jump ship.

The bios is flashed via UEFI shell. I will find the instructions and make you a zip file with all the files needed what ram configuration are you using 2 sticks or 4 sticks? Sorry for delay in response didn't get a notification. Update: I have made a USB.zip file with everything including instructions for flashing. Once i have backed up my file server i will upload it and then send link in DM.

What bios version and ec version are you running as having OC enabled in bios has been known to cause stability issues, which is what I was talking about buggy code.

Ouch that sucks about the KM bud, Mine has had issues as well with shutdowns but that seems to have settled after Bios and EC firmware update, my issue was more RAM compatibility issues more then anything else. Totally agree Locked Bios sucks, however Clevo can be stubborn i have heard. @Jaggy84 Nice temps on CPU still though i see your running entertainment mode (As thats the only mode that throttles at 86c), I will soon be getting an i7 11700K so i can do some undervolting on CPU, got a decent volt cure on GPU but locked CPU can't use XTU or even TS to undervolt (Thanks intel), heck i can't even enable XMP unless a K/KF SKU CPU is inserted. As for any more DTR's from Clevo i think their hands are tied due to the route that Intel has taken with the lack of MXM support on 12th gen, i also wouldn't be surprised if Nvidia goes that route as well.

Nice looking Heatsink, is that the Air or Water Cooled version? Also whats it performance over the stock Heatsink like??? Also +Rep for shinny IHS's and Dies! As for the Bios, yes its sad that there is no ETA from Prema, however the Bios is a bugged mess. Even unlocking said Bios and having all the options will not help much till the bugs are fixed by Clevo.

Nice, was there a reason to jump from debian to fedora? I don't see myself jumping from good old apt to aur though.

Updated links will always be in my signature! Made By: solidus1983 (hacktrix2006) and djlenior Status: Final Release Repack: Yes CodeName: Zeus Downgrade/Update: Update Disclaimer: This Driver Modification is for MSI Systems listed below! Myself nor NotebookTalk or any other members of the project will not be held liable for any damage caused if this is installed on your system or other branded systems! Due to this being a Modified Driver, support will not be given via Nahimic (SteelSeries) or MSI if your having issues please post in the thread! Please note all releases will come with VirusTotal reports so you can decide if to install the modified drivers or not based on the Results, Although the dedicated server used to create these files is VirusFree! VirusTool can pick up on false positives, but to be fully open to the community reports will now always be included. Installer: Realtek_UAD_6.0.1.9289.1_MSI_Nahimic_UWP_mod.exe (ONLINE!) Package includes: Realtek UAD 6.0.1.9289.1 Nahimic 1.8.13.0 UWP Nahimic SWC 3.5.0.0 (APO3) Nahimic SWC 4.6.3.0 (APO4) Nahimic Extension 1.1.44.0 (APO3) Nahimic Extension 1.2.53.0 (APO4) Nahimic Mirroring Driver 2.0.0.0 Realtek Audio Console UWP 1.32.261.0 Installer: SHA-1: 7d672f4114ede39e279eca1a727aeb32fc441699 Size: 122413635 bytes (116 MiB) Virus Total: Results or Windows 10 Build: 1909/20H1/20H2/21H1 For Windows 11 Builds (But may be issues) Change Log: Supported Systems with this driver pack: Alpha Series: Bravo Series: GE Series: GF Series: GL Series: GP Series: GS Series: GT Series: GV Series: ***Don't panic if the new Laptops/Systems are not in the list they will be supported they are more likely supported, install the drivers and if it works let me know your Model Number and it will get added to the list.*** Install instructions: Disconnect from the internet. (Not Required, so very Optional) Reboot System and Enter BIOS/UEFI. Please DISABLE SECUREBOOT in your BIOS this is now important for this new installer! Once you have booted back into the OS Temporarily disable AV software (Some Anti-Virus tools might false report and delete the file!). Now run the Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe Installer Select either Full Install, Install Without Nahimic, Full Uninstall or Downgrade Nahimic 3. Sit back and relax as the UWP's get uninstalled, the driver gets uninstalled and then your system is rebooted into test signing mode and everything is installed and your system is rebooted again! Now head back into your BIOS/UEFI and Re-enable SecureBoot!! Now let the system boot up fully and re-enable the internet connection. (Only if you disconnected from the internet) ***[IMPORTANT]**** As i no longer have a MSI Laptop can users please report any and all issues to this forum thread so i can rectify them quickly. Known possible bugs and fixes: Issue: Two Nahimic Mirroring device show up in Device Manager: Solution: run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Uninstall first before using Full Install. Issue: Nahimic 3 updated via Windows 10 Store and no longer works. Solution: Head into Windows 10's Store and Select the 3 Dots, followed by Settings and turn of Windows Store's Auto Application Updates, then run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Downgrade Nahimic. Issue: Ran Nahimic 3 Downgrade option however Nahimic 3 1.8.9.0 UWP effects are not working or its reporting the device is not upto date. Solution: Simply run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe select Uninstall and then after its completed the Uninstall re-run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Install APO3 or APO4. Issue: Jack Detection not working. Solution: Simply go to Realtek Audio Console Disable and Re-enable it. Issue: Microphone not working after using Nahimic Optimizer. Solution: Click Reset inside Nahimic Settings section will fix this. Issue: Microsoft Overwritten the installed modded driver. Solution: Head to Settings → System → About, Now click System info then Select Advance System Settings → Hardware Tab → Driver Installation Settings, now select NO! save and reboot the system. Then run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Uninstall, after it has rebooted your system re-run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Install. Issue: Nahimic 3 reports its device is not compatible basically not working. Solution: Run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Uninstall, after it has rebooted your system re-run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Install APO3 or APO4. Issue: Sound has become muffled/suppressed/distorted. Solution: Run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Uninstall, after it has rebooted your system re-run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Full Install APO3 or APO4. Issue: I don't want the Nahimic 3 Bloatware! Solution: Run Realtek_UAD_6.0.1.9279.1_MSI_Nahimic_UWP_mod.exe and select Install Without Nahimic ***[IMPORTANT]**** I would like to thank the following people for whom have helped. I like to personally thank the following users. Project Programmers: Installer Testers: Driver Suppiler: Original Thanks:

I didn't see that mentioned on their page but nice to know, but then again it didn't state that the 7560 has 3 m.2 slots and on the 7760 it has 4.

Just checked the specs of your new Laptop specs on Dells site it states its PCI-E 3.0 X4 Nvme so although PCI-E 4.0 NVME drives will work you will not see them high numbers. However if your looking for Higher IOP's then it would be the Samsung 980 Pro that something that Samsung is good at and WD is yet to get to.

Not getting what you mean in the "expect it to have the lowest health status" do you mean it should be this low?? or its abnormally low? Any ways i am going OT sorry.

I respect your point of view, i had several drives from Samsung simply fail for no reason, if it wasn't for the Backup bible i would of lost a lot of data. Hence i moved to WD/Sandisk, i am simply showing some options too. hence i am giving my $0.01 worth.