Jump to content
NotebookTalk

Developer79

Member
 View Profile  See their activity

  • Posts

    262

  • Joined

  • Last visited

 Content Type 

Everything posted by Developer79

  1. Developer79
    My last test with the GPU extension and internal display connected...
  2. Developer79
    I still have a lot of these pads...I would just have to measure them...
  3. Developer79
    Yes, that might be an option!
  4. Developer79
    No, this laptop cannot be upgraded beyond the GTX9xxm series! Only if there is an MXM card in the old format with a newer GPU like RTX 20/30 series. But that is not known to me!
  5. Developer79
    Yes, that's the idea. The desktop GPU is to be installed inside the P870xx. Of course, a corresponding cooling system must then be manufactured. I'm leaning towards an RTX4080. RTX4090 is absolutely oversized in everything:-) I think the P870xx would already be the fastest laptop with an RTX4080 anyway:-)
  6. Developer79
    It would be almost logical if 4 Nvme hard disks were supported....
  7. Developer79
    Better is the backside and very close up!:-)
  8. Developer79
    If you take a close-up photo of the MXM NVme board, I can tell you exactly what the maximum support is. For the P870xx it would be 8 lanes. I can't tell you for the GTx!
  9. Developer79
    Yes exactly, the right picture belongs to the P775xx series and the left heatsink was for the P750xx series!
  10. Developer79
    However, the MOD only works if 8 lanes of the MXM port are used. Otherwise it does not work.
  11. Developer79
    Almost standard from my point of view:-)
  12. Developer79
    I'll wait for it and let you know as soon as it arrives! Thank you for your trust!
  13. Developer79
    Yes, you know for long time!:-)
  14. Developer79
    Yes, it's the same. My development works for all constellations regarding the old GTX10xx and RTX20xx/Super MXM Clevos!!!
  15. Developer79
    Price: ca. 150 Euro or best offer Condition: new Warranty: no Reason for sale: no need Payment: Paypal or bank transfer Item location: Germany Shipping: yes International shipping: yes Handling time: - Feedback: Specification: Proof of ownership: Time Stamped pictures Of course the adapters work for all Clevos with GTX10/20xx series MXM! I have not photographed all heatsinks for a long time, here only as an example of the P870xx Normal and Vapourchamber! Feel free to PM me if you don't know if the heatsink works or not. You don't need to buy new heatsinks, everything works with the original heatsinks after machining.
  16. Developer79
    In principle, any display will work as long as the 40-pin connector is present. You can use all possible manufacturers. Many people always ask me about the frame rates in 4k! With the RTX30xx series, I have consistently achieved good and high frame rates. The level of detail is also a matter of taste. You also have to bear in mind that everything looks great in 4k even at low settings. Nevertheless, I have the highest settings for most games and it still runs very well. The worry is that if there are fewer HZs in a game than the display can handle, it still looks smooth in my opinion. I think this problem is overrated! You can use the Samsung OLED, it's supposed to be very good. In any case, if you want real UHD/4K, only AUO in high Hz numbers will do! At lower resolutions but even higher than FHD, all possible manufacturers will do.
  17. Developer79
    1. it is actually not difficult. It is not a big problem if a display does not have the appropriate holes. Either you make more effort or you don't. I have built with brackets from a special jig. Razor only uses tape. I think my solution is more professional, but to each his own 🙂 2. the cable must have 4 lanes for 4k and be the right length. That's it. 3. you can choose all kinds of manufacturers with touch or without. 4k in 17.3 will be a problem at higher Hz numbers, as I said. Only AUO can do that! With 15.6 it looks different again and there are companies like sand by the sea!:-)
  18. Developer79
    Every donation is welcome! I can always use something 🙂
  19. Developer79
    Exactly, they don't match and are not interchangeable. You can only either buy new heatsinks for the RTX30xx series, if they are available for the p750DM2, or I have adapters with which it is possible to screw on the RTX30xx. The P750DM2 went up to the GTX10xx series so this is possible! Greetz
  20. Developer79
    Hi, all displays that fit into LCD housings will work! It doesn't matter which Hz. You just have to have the right cable. Length and lanes are important. That means 4 lanes and the right length of course. UHD is possible up to 144 HZ. More is not possible in this size. I have UHD 120 HZ, which looks very cool. I might install the UHD 144 HZ soon, we'll see. Or rather, your question was aimed more at 15.6. There are even more options there than with the P870xx or P775xx. I once asked a manufacturer about the availability of 17.3 with OLED. The manufacturer said that there are simply more devices with 15.6 inches than 17.3 inches! Well, I think UHD 144 Maximal is very impressive and the action is really cool:-) I hope that answers your questions. Greetings
  21. Developer79
    Development would also go much faster if we had more money available. I'm still looking for companies that support this. Or sponsors. The projects also cost money and not just time:-) If we had more money available, we could realize everything faster... It might also be possible to expand the CPU, but for the reasons mentioned above, things don't always work out the way you want....
  22. Developer79
    Just think about it for a moment:-) If you insert an MXM card, what angle does the board take when you first insert the MXM card into the slot? Always at an angle to the motherboard. But if you screw the MXM card in, then the card is parallel to the motherboard. It is exactly the same in the picture. Of course my adapter board will be parallel when a desktop card is inserted. The photo is only intended to show a certain perspective. The plan is to have everything closed, like the original! The desktop card will not stick out at an angle to the motherboard, but will be just as parallel as an MXM card! This will allow the P870xx to be closed by the bottom cover...:-)
  23. Developer79
    Here is a photo with Adapter and Power Supply for P870xx GPU extension:
  24. Developer79
    You also have to make special bios modifications. But it works in any case. The 10th gen notebook CPU has the same requirements as the 9th generation from the point of view of switching control...
  25. Developer79
    I'll take that as a compliment :-) Yes, the CPU conversions are still "relatively" simple! Of course, some things have to be done, is clear. Unfortunately, the P775xx is relatively limited in terms of space, so only the CPU MOD would work. The new generations might also work. 13TH/14TH HX. I have checked the technical requirements as far as possible. In addition to the hardware side, the bios side would also mean a lot of work.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use