Developer79

I don't have any more links but I have experience with the RTX30xx. This series has good heat development and is therefore particularly suitable for the P870xx with Vapourchamber. You can see the temperatures in many of the pictures I have posted. My experience shows RTX3070 at around 50 degrees and RTX3080 at around 60 degrees. Always depends on the outside temperatures and of course the fans have to be running. Somehow the air cooling has to cool the power loss away! That should be fine with the P870xx.

I've been posting this in the forum since the beginning. These are adapters that I have developed myself. I have already made the 3rd version of them. I've been using the adapters since the start of the last MXM series RTX30xx:-)... I developed and manufactured these adapters with 3D-CAD etc. .... My aim was to integrate the RTX30xx as well as possible into the P870xx and above all to continue to use the cooling performance of the Vapourchamber. The RTX3080 is at max. 60 degrees and the RTX 3070 runs at a low 50 degrees. All at full performance at the highest detail levels...

This is definitely the best cooling ever! I have used it to run a maximum of 2x RTX3080s in the P870xx! The perfect choice for an RTX30xx. I can only recommend it to everyone. With my adapters, this heatsink works without any problems for the RTX30xx series in the P870xx!:-)....

Hi, test the following things: 1. is the eDP cable seated correctly and do you have another one to test. Be careful when plugging and unplugging it. It always has voltage with battery and also without but with power supply. Because of short circuits!!! 2. is the MXM port really clean? All DP port channels have extra pins. You have to check that. It is best to carefully blow it clean with compressed air! 3. do you have another display to test? 4. the other things are very difficult to measure. Do you know how to use measurement technology? And you must be familiar with the schematic of the P755xx. Which display are you testing? Greetz

Hello, 1. HW-ID is 1C20. Change accordingly in the desktop driver. 2. uninstall all recent drivers with DDU. 3. boot with driver signature disabled and install desktop driver. 4. reboot done! Greetz

Do you have the factory bios on it now or Dsanke!?

I understand your concerns! Maybe you can get one somewhere. How much do you want to spend on a new card?

The price is one thing, but I would recommend the RTX3070! The RTX2080S has slightly higher temperatures again, so the RTX30xx would be slightly better and cooler:-)

I think that always aligning the frequency with the graphics card or the display is overrated. Of course, a graphics card should not be slow if you have a fast display. As I said, a good display still doesn't look good on a slower graphics card:-) You don't necessarily have to have an RTX3080 either. An RTX3070 or RTX2080/70 is also still very good. That's really complaining at a high level:-) You can immediately recognize the better display in any type of game, regardless of graphics card performance. And what do you think of the RTX 4090? I didn't understand. I'll send you a link for the cable when the store is up and running again!

Yes, all you really need is a cable, and you can build brackets or mounting options yourself. I think Display is great! It has great colors and looks absolutely awesome on 3D shooters and other games! I think the games only look really good from 4k upwards anyway. If the display is also good, then of course it's great. As I said, I'll be getting the 4k 144 Hz soon! Then get the B173ZAN06.9 display! I want to buy that too. But many people think it's not worth it if you don't have a fast graphics card because of refresh rates. I think that's complaining at a high level! I think it always looks good. Of course, at least an RTX3070 would be good for the display and a GTX980M not so good:-) I hope you know what I mean. I've been using the 4k 120Hz for a long time, where others haven't thought of it yet. I can only repeat it again and again, the P870xx /P775xx is great for upgrading. Of course, the P870xx is even better in this respect, but that's also a matter of taste. From a technical point of view, I find the P870xx very interesting. Of course, the CPU is a bit older, but in my tests with the RTX40xx generation, you would have the fastest laptop in the world in terms of gaming! As I said, my suggestion for the CPU upgrade would be technically possible, but again, it would be a big project!

My next one will be the B173ZAN06.9. Not from Titan, just the new 4k 144Hz:-)

Of course the cable has to be adapted, that's clear! You can order them from AliExpress, for example... I say yes, changing the panel is absolutely great! The latest laptops look old in comparison:-) My panel is the: AUO B173ZAN03.3

As I said, it depends on what you want! If you want an RTX30xx series, my recommendation is the Vapourchamber! You can use a modified bios, but I repeat, the normal Clevo bios is perfectly adequate and compatible. It works with every MXM card from Clevo from GTX900M - RTX30xx There are versions to buy from time to time. As far as I know, you could buy the last version in Poland! I'll have to look it up myself, I don't know this card yet! Sorry, unfortunately OLED is only available up to 15.6 inches. Unfortunately not yet in 17.3" according to Panellook. As I said, I currently have a 4k 120Hz display and have been enthusiastic about it for a long time. I can't imagine anything else. Even most of today's laptops still don't have 4k 120Hz or 144Hz!!! That says it all, including the upgradeability of the P870xx in this respect!

Hi:-) to 1) If you have the Vapourchamber, this is recommended for the RTX20/30 series. This is the best cooling system besides water. With the RTX3080 I have 55-60 max! With my adapters you can run the RTX30xx series without any problems. See this thread. The RTX20xx series also works without Vapourchamber! to 2) The Vapourchmaber must be adapted for RTX20/30xx if you use them! With my adapters, you can install the RTX30xx series without any problems. 3) No, he doesn't do anything official anymore, unless you know him well 🙂 4) What do you mean? 5) Not as far as I know! But there are always new developments. to 6) Yes, there are some panels that go. I've been using 4k panels with 120Hz for a few years now. I want to switch to 4k 144Hz soon. You can also install OLEDs or other manufacturers. You just have to make the mounts yourself. But the compatibility is very high. It is important that the edp cable 40PIN fits. All other resolutions and frequencies and panel technologies are also possible! Not all, but many. It is also possible to install the latest desktop graphics card generations of the RTX40xx series. Of course, the PCB must be correspondingly small! This is another project of mine. I want to test the RTX4080 soon. And of course that would be water cooling, either dual or internal. I mean with external heat exchanger and internal heat exchanger. I can leave a picture of my latest development! The CPU expansion would theoretically also work on 13th/14th gen notebooks! I have looked at all the specifications. But that would be another huge new project. I'm not in the mood for that right now. These are the possibilities with the P870xx in general. Greetz Developer79

I have already commented on such things! Apart from the fact that the new generations are perhaps a little faster, all manufacturers are developing at the same pace. Apparently, the intention is to prevent upgradability and increase profits in the short term. In my opinion, the P870xx is still a really good choice. My review of the CPU specifications of the P870xx show that the CPU can be upgraded to 13th/14th generation notebooks. Of course, you have to develop the additional boards and make certain changes to the P870xx motherboard. Theoretically it is possible!!!

Hi, I don't think there are huge differences between the two laptops! There are a few things that can be emphasized. On the whole, there is not a huge leap. I think from a technical point of view, the P870xx is much more interesting. Especially when you look at the trend of the latest laptops. Everything is soldered. It basically prevents upgradability. The 2 laptops are the last flagships with real upgradeability. Especially the P870xx is ingenious in this respect. I have checked the requirements for CPU expansion. It would actually be possible to upgrade to 13th/14th gen mobile, of course you would have to design a board! You would then have PCie 5.0 on the GPU. With my GPU expansion this would be the ideal addition. On the other hand, the question is. My tests with the RTX4070ti have shown that the P870xx is at least gigantically fast in terms of gaming. But I still want to do tests with the RTX4080, because RTX4090 was too big too much:-) Greetz

I measured the memory pads of the GTX10xx series again. These are approx. 1mm(0.95mm) hundred percent!:-) It's the same for both variants, hard or soft! Just for your information....

I'll measure other pads again tomorrow then....

the hard pads are 1.0 mm! I wouldn't recommend doing this with putty... Just use the right pads and you're done....:-)

Sorry, I forgot all about it! The memory PADS are 1.0 mm thick... They are not 0.5mm!!! I just measured it...

This was my last test with the GPU extension with the RTX 4070Ti: 3d Mark has been updated with the new Cards:-) Now you can estimate a bit better where my combination is in terms of performance:-)

I have just done a test with the GTX1050Ti(75W) Desktop with my GPU extension. Metro Redux runs surprisingly well with the card:

I'll have a look tomorrow...

My last test with the GPU extension and internal display connected...

I still have a lot of these pads...I would just have to measure them...