*Official Benchmark Thread* - Post it here or it didn't happen :D

[electrosoft]

5 hours ago, Mr. Fox said:

They are preparing their own autopsy report and signing their own death certificate. Turdbooks, sure, whatever, I literally don't care about anything mobile even a little bit. This is totally unacceptable on any Z or X series desktop motherboards. 

 

EXCELLENT example of why rushing to flash firmware just because an update exists exhibits the pinnacle of stupidity and the apex of ignorance.

 

If enabling LN2 mode restores the feature without goofing up something else it will be OK overall. I always ran all of my Dark motherboards in LN2 mode 24/7 without issue. HOWEVER the idea of enabling LN2 mode freaks some people out enough that it could cause serious irreparable harm to Intel. The bottom line is if the new Core Ultra CPUs are so fragile this idiotic safeguard is necessary to avoid damaging them then they are not a good purchase decision. Having unlimited power limits should do absolutely nothing to the CPUs unless they have been designed to be fragile rather than resilient as Intel CPUs have always been famous for. They were always hard to kill, even if you were deliberately trying to.

 

Agreed, if it is a simple bios selection that is fine. If it goes the way of a "special" Bios only available to some and I have to track it down that is irritating but I'll manage. If it turns out to be a temperature detect feature enabled only, I will be pissed off.

 

 

[win32asmguy]

6 hours ago, Mr. Fox said:

They are preparing their own autopsy report and signing their own death certificate. Turdbooks, sure, whatever, I literally don't care about anything mobile even a little bit. This is totally unacceptable on any Z or X series desktop motherboards.

 

I don't buy this explanation. K should mean fully unlocked even if it's on air cooling. If it's a warranty issue they should just sell it without one.

 

Maybe they are pulling it back on these but will allow it again on a further overpriced KS sku.

[electrosoft]

If you're looking for 285k's, Central Computers has combos with discounts they will ship right to you

 

If you want just the CPU, Antonline has them for $699 (marked up by $80)

 

Also on Amazon from Ant and Spicy Bomb for $699.

 

Definitely not worth ANY type of mark up (if at all), but you can see levels starting to catch up in pockets.

 

 

 

 

 

 

[ssj92]

Ah what a roller-coaster it's been. 

 

Bought Z790 + 14900K to replace 10980XE + X299

 

Returned 14900K and bought 12700K as stop-gap for Z890. 

 

Bought Core Ultra 9 285K on release with no MB.  

 

Returned the Core Ultra 9 285K, sold Z790+12700K system. 

 

Bought Xeon W7-3465X + W790 ASUS SAGE MB and the money has been draininngggggggggg

 

But so happy I'm back in HEDT land...lol 

 

Just a teaser, I'm probably gonna need liquid cooling instead of my Noctua cooler. 

 

 

  

On 10/25/2024 at 9:55 AM, tps3443 said:

After my recent experience this week I think it matters how the chip is made up, the first thing I noticed is system fluidity on my 3175X. Zero delays, zero skips when working, just brute multitasking power like nothing is happening. I faintly remember this on my 7980XE@5.0Ghz and DDR4 4000, and I remember it being able to play two games at once 100% smooth, one in VR, and one on flatscreen. But I have been using the big/little chips for a few years now, so I have gotten use to the quirks, and it was just a normal thing. But I always thought the P/E chips while absolutely brutal in multithreaded, get a little lost in translation sometimes when the load gets high, and the apps multiply, and the windows services start stacking up. Use the OS for a few hours for work, close things out, and these high R23 scores have depleted, only a restart will replenish this. I can imagine this sounds hilarious, but it was the first thing I noticed on this absolute dinosaur of a system. I had to mention how smooth a true high core count CPU is. I can only assume the 9950X and Threadripper chips are like this as well 🧐

 

This makes me want to transition to W790 or the new W890 platform in the future and use only Monolithic CPU’s with only P-Cores. Because it is a big difference in smoothness. When we forget about what CPU we’re using, and we’re just working and doing things on the desktop running virtual machines, maybe minimizing games as well, the smoothness is definitely there on high core count Monolithic CPU’s that only have P-Cores available. 
 

After this experience, I truly wish Intel would go back to all P-Cores and monolithic chips. If they released a 10/20 chip with some crazy good IPC and massive cache size I would absolutely own one. 

 

This is exactly what I am experiencing. Especially with the Optane P5800X drive. Everything feels so smooth. 

[tps3443]

40 minutes ago, ssj92 said:

Ah what a roller-coaster it's been. 

 

Bought Z790 + 14900K to replace 10980XE + X299

 

Returned 14900K and bought 12700K as stop-gap for Z890. 

 

Bought Core Ultra 9 285K on release with no MB.  

 

Returned the Core Ultra 9 285K, sold Z790+12700K system. 

 

Bought Xeon W7-3465X + W790 ASUS SAGE MB and the money has been draininngggggggggg

 

But so happy I'm back in HEDT land...lol 

 

Just a teaser, I'm probably gonna need liquid cooling instead of my Noctua cooler. 

 

 

  

 

This is exactly what I am experiencing. Especially with the Optane P5800X drive. Everything feels so smooth. 

Absolutely WICKED!! Yeah I’m loving my Xeon 3175X and my ram capacity has been pure reliability with 192gigs. Which DDR5 did you go with? How high could you clock the 3465X daily? And just so everyone knows, this monstrously strong 3465X is the prior gen model 🤯so I’m absolutely impressed. Although, I think they are pretty similar honestly. This makes me want to go ahead and buy a W790 motherboard though. 😁

 

Also, that Sage is Octa channel right? 

[jaybee83]

8 hours ago, Mr. Fox said:

Gosh, what is going on with PC tech stuff? I guess they take turns being kings of failure. Clearly, this is user error, but there is a popular mentality of trying to making companies responsible for the stupidity, ignorance and incompetence of the people that buy their products.

 

---

I ordered the TG heatspreader (I think @jaybee83 has one) to see how the temps using that compare with the Mycro Pro direct die block.

 

yeps, remembered correctly! its still unoptimized though, had been planning to shave down the plastic standoffs for proper cold plate contact, and now its a year later (damn, having a kid REALLY kicks you in the balls in terms of having time for hobbies lol).

anyways, planning to get me another one due to their improved manufacturing, and with 9950X3D around the corner, might as well do all that in combo with a fresh windows install and the 5090 🙂

lemme know what ur findings are!

 

2 hours ago, ssj92 said:

This is exactly what I am experiencing. Especially with the Optane P5800X drive. Everything feels so smooth. 

 

noice, pls some more deetz switching from regular flash SSDs to the P5800X, im highly interested 🙂 which capacity / sku are u sporting? how much did u get it for?

[electrosoft]

53 minutes ago, jaybee83 said:

anyways, planning to get me another one due to their improved manufacturing, and with 9950X3D around the corner, might as well do all that in combo with a fresh windows install and the 5090 🙂

 

(While visions of 5090's and Taichi x870e equipped 9950X3Ds float through my head)

 

[Papusan]

12 hours ago, Mr. Fox said:

Gosh, what is going on with PC tech stuff? I guess they take turns being kings of failure. Clearly, this is user error, but there is a popular mentality of trying to making companies responsible for the stupidity, ignorance and incompetence of the people that buy their products.

 

This full warranty is called “Top Ten Repair Services” by MSI in China, and this movement will begin in the Asian country and, apparently, will extend to the rest of the world after evaluating its operation and customer satisfaction.

 

MSI creates “full warranty” for its motherboards: free repair for bent pins, wear and tear and various damages with home pick-up and delivery

In the world of cars, there are brands that wash their hands of the matter in a bad way, and others that respond to practically everything. Toyota, Mazda or Honda are examples of the fact that the customer is always right and must be satisfied, so...

 

 

[tps3443]

19 minutes ago, Papusan said:

 

This full warranty is called “Top Ten Repair Services” by MSI in China, and this movement will begin in the Asian country and, apparently, will extend to the rest of the world after evaluating its operation and customer satisfaction.

 

MSI creates “full warranty” for its motherboards: free repair for bent pins, wear and tear and various damages with home pick-up and delivery

In the world of cars, there are brands that wash their hands of the matter in a bad way, and others that respond to practically everything. Toyota, Mazda or Honda are examples of the fact that the customer is always right and must be satisfied, so...

 

 

MSI is one of the best! Good quality, reasonable prices. Good products. I always thought the Suprim X products were better than ROG stuff. I have this MSI 1KW baby PSU, it is pounded by a 4090 and a overclocked 28 core Xeon and (5) pumps. The thing gets really warm being that it’s always under a 400+ watt to over 1,000+ watts of load. And it holds up great without any weird noises. 🤣I am planning to add another though. My current CPU overclock is limited by the one PSU. So I’m gonna add another right beside this one. 

[ssj92]

I figured since we're having our first baby in February now is the time for me to build my beast before it's too late lol. 

 

  

4 hours ago, jaybee83 said:

 

yeps, remembered correctly! its still unoptimized though, had been planning to shave down the plastic standoffs for proper cold plate contact, and now its a year later (damn, having a kid REALLY kicks you in the balls in terms of having time for hobbies lol).

anyways, planning to get me another one due to their improved manufacturing, and with 9950X3D around the corner, might as well do all that in combo with a fresh windows install and the 5090 🙂

lemme know what ur findings are!

 

 

noice, pls some more deetz switching from regular flash SSDs to the P5800X, im highly interested 🙂 which capacity / sku are u sporting? how much did u get it for?

 

I bought a Intel Optane P5800X 400GB SSD (U.2 form factor). It has the Dell EMC branding. Got it from eBay, it was brand new. Cost me $450 which is expensive but I'm using it as a boot drive. Thinking of going ASUS Hyper M.2 4x card for 4x NVMe drives RAID0 or RAID0+1 for my secondary drive. Right now I have SK Hynix 2TB P41 and a 16TB HDD + 10TB HDD (WD Red/WD Gold).

 

My motherboard has SlimSAS ports so I bought a SlimSAS to U.2 cable. It shows up in bios/windows as any ordinary NVMe drive. You can even get a M.2 to U.2 adapter as well. The P5800X is a PCIe 4.0 x4 drive, it's the last/fastest Optane drive made as far as I am aware. I only install OS/Apps on the Optane drive. Everything else will go to the other SSD. 

 

There's also the P1600X which is essentially the same thing running at PCIe 3.0 x4 instead. It also has the latest Optane memory as well. 

  

6 hours ago, tps3443 said:

Absolutely WICKED!! Yeah I’m loving my Xeon 3175X and my ram capacity has been pure reliability with 192gigs. Which DDR5 did you go with? How high could you clock the 3465X daily? And just so everyone knows, this monstrously strong 3465X is the prior gen model 🤯so I’m absolutely impressed. Although, I think they are pretty similar honestly. This makes me want to go ahead and buy a W790 motherboard though. 😁

 

Also, that Sage is Octa channel right? 

 

Did you get the EVGA SR-3 motherboard? I was debating on going that + W-3175X early in the year but figured I'd wait and glad I did. I'm keeping my SR-2 build, the MB is awesome. 

 

Yes Sage is Octa-core. I went with Corsair WS DDR5 ECC RDIMM 128GB (8 x 16GB) DDR5 DRAM 5600MT/s CL40 Memory Kit. I'm running the XMP profile @ 5600Mhz for now which seems to be perfectly stable. Haven't really tried going higher than that yet. With 8-channels the bandwidth is already insane. 

 

Stock clocks I get around 58C max temps in CB R23 and around 43K score. The 55K score was at all core 4.1Ghz or 4.0Ghz (forgot which one). 

 

At 4.0/4.1Ghz I am hitting 82C temps so I'm already reaching the Noctua NH-U14S DX-4677 limit. I'm seeing 548W peak cpu power. This is all on stock voltage with no increases yet. I can probably daily this easily (especially since right now I only have 1 case fan lol). 

 

Case is Corsair 9000D and I plan to buy like 16 Noctua fans later to give it some airflow. Also might go water cooling with 2x480mm radiators at least. 

 

PSU is Corsair HX1500i. 

 

I got the CPU for less than half of its MSRP. That's kind of how it all started. It was used but it works fine. 

 

I had a license of Windows Server 2025 Datacenter so I thought, why not? LOL I'm surprised how similar they made it to the LTSC style builds. Audio was already active, didn't need to do too many registry edits. No MS Store either. 

[tps3443]

1 hour ago, ssj92 said:

I figured since we're having our first baby in February now is the time for me to build my beast before it's too late lol. 

 

  

 

I bought a Intel Optane P5800X 400GB SSD (U.2 form factor). It has the Dell EMC branding. Got it from eBay, it was brand new. Cost me $450 which is expensive but I'm using it as a boot drive. Thinking of going ASUS Hyper M.2 4x card for 4x NVMe drives RAID0 or RAID0+1 for my secondary drive. Right now I have SK Hynix 2TB P41 and a 16TB HDD + 10TB HDD (WD Red/WD Gold).

 

My motherboard has SlimSAS ports so I bought a SlimSAS to U.2 cable. It shows up in bios/windows as any ordinary NVMe drive. You can even get a M.2 to U.2 adapter as well. The P5800X is a PCIe 4.0 x4 drive, it's the last/fastest Optane drive made as far as I am aware. I only install OS/Apps on the Optane drive. Everything else will go to the other SSD. 

 

There's also the P1600X which is essentially the same thing running at PCIe 3.0 x4 instead. It also has the latest Optane memory as well. 

  

 

Did you get the EVGA SR-3 motherboard? I was debating on going that + W-3175X early in the year but figured I'd wait and glad I did. I'm keeping my SR-2 build, the MB is awesome. 

 

Yes Sage is Octa-core. I went with Corsair WS DDR5 ECC RDIMM 128GB (8 x 16GB) DDR5 DRAM 5600MT/s CL40 Memory Kit. I'm running the XMP profile @ 5600Mhz for now which seems to be perfectly stable. Haven't really tried going higher than that yet. With 8-channels the bandwidth is already insane. 

 

Stock clocks I get around 58C max temps in CB R23 and around 43K score. The 55K score was at all core 4.1Ghz or 4.0Ghz (forgot which one). 

 

At 4.0/4.1Ghz I am hitting 82C temps so I'm already reaching the Noctua NH-U14S DX-4677 limit. I'm seeing 548W peak cpu power. This is all on stock voltage with no increases yet. I can probably daily this easily (especially since right now I only have 1 case fan lol). 

 

Case is Corsair 9000D and I plan to buy like 16 Noctua fans later to give it some airflow. Also might go water cooling with 2x480mm radiators at least. 

 

PSU is Corsair HX1500i. 

 

I got the CPU for less than half of its MSRP. That's kind of how it all started. It was used but it works fine. 

 

I had a license of Windows Server 2025 Datacenter so I thought, why not? LOL I'm surprised how similar they made it to the LTSC style builds. Audio was already active, didn't need to do too many registry edits. No MS Store either. 

Yeah that’s a very strong system, I’m going to build a W790 or W890 next. These systems are really so much more fun than mainstream platforms. Makes you feel like you actually have something, or that’s the feeling I have anyways lol. HEDT is really just wicked. I did not get the EVGA SR3, I have a Dominus. It has been one of the easiest platforms to tune with world class stability though. The SR3 is nice and I love those, but a little limited with only (6) ram slots. So I was considering ram capacity and longevity etc. Apparently the Dominus Extreme and 3175X can actually support a lot more ram than their specs have them listed for. 
 

Your CPU was a good choice though, and that’s a good price. I think finding a good deal is what it’s all about, some people are asking too much for these chips even the used ones. I’m going to be looking for something similar to what you have though. Not quite sure if I want to go Quad channel or Octa channel like yours. 
 

keep us posted on some Aida 64 runs, and or any ram overclocking if you go that route. Nice temps as well! 
 

I really can’t imagine your CPU on a chiller!!! 😍😍😍 That would be a sight to see! I’d bet 4.8Ghz possibly 4.9Ghz can be done for sure. Massive silicon! With a massive P-core only CPU’s. Definitely go custom loop. You can probably do a nice easy 4.5Ghz-4.6. 

[ssj92]

1 hour ago, tps3443 said:

Yeah that’s a very strong system, I’m going to build a W790 or W890 next. These systems are really so much more fun than mainstream platforms. Makes you feel like you actually have something, or that’s the feeling I have anyways lol. HEDT is really just wicked. I did not get the EVGA SR3, I have a Dominus. It has been one of the easiest platforms to tune with world class stability though. The SR3 is nice and I love those, but a little limited with only (6) ram slots. So I was considering ram capacity and longevity etc. Apparently the Dominus Extreme and 3175X can actually support a lot more ram than their specs have them listed for. 
 

Your CPU was a good choice though, and that’s a good price. I think finding a good deal is what it’s all about, some people are asking too much for these chips even the used ones. I’m going to be looking for something similar to what you have though. Not quite sure if I want to go Quad channel or Octa channel like yours. 
 

keep us posted on some Aida 64 runs, and or any ram overclocking if you go that route. Nice temps as well! 
 

I really can’t imagine your CPU on a chiller!!! 😍😍😍 That would be a sight to see! I’d bet 4.8Ghz possibly 4.9Ghz can be done for sure. Massive silicon! With a massive P-core only CPU’s. Definitely go custom loop. You can probably do a nice easy 4.5Ghz-4.6. 

Looks like I got the CPU for $1,195 plus tax, not bad considering a 285K is like $600. 

 

If you got 34xx/35xx CPU definetely get the sage motherboard. I've never seen so many BIOS options ever in any other board. Also you get octa-channel. 

 

If you get the 24xx/25xx CPU then get a ASRock board for like $600. The Sage is $999, I got it for 949, but it was on sale for 899 recently. 

 

24xx/25xx has 64 lanes, 34xx/35xx has 112 lanes. I think it's worth going 34xx/35xx because every pcie slot is 5.0 x16 (except one @ x8 only because you get two M.2 PCIe 5.0 x4 slots). 

 

I don't think the wife would let me have a chiller in the living room LOL. But I do want to do a custom loop. 

 

I've only done a custom loop once, but I'm assuming having 4x 480mm radiators would still be beneficial over 2 x480mm radiators? Or does it reach a diminishing returns?

[electrosoft]

3 hours ago, tps3443 said:

MSI is one of the best! Good quality, reasonable prices. Good products. I always thought the Suprim X products were better than ROG stuff. I have this MSI 1KW baby PSU, it is pounded by a 4090 and a overclocked 28 core Xeon and (5) pumps. The thing gets really warm being that it’s always under a 400+ watt to over 1,000+ watts of load. And it holds up great without any weird noises. 🤣I am planning to add another though. My current CPU overclock is limited by the one PSU. So I’m gonna add another right beside this one. 

 

After the death of EVGA, MSI moved into my top slot and surprisingly Asrock is climbing quickly too. The MSI 1300w 12vhpwr PSU is crazy quiet. Then again, my EVGA 1600w P2 is crazy quiet and holding it down too.

 

3 hours ago, ssj92 said:

I figured since we're having our first baby in February now is the time for me to build my beast before it's too late lol.

 

Congrats! Life is about to get crazy hectic in the best way.

[tps3443]

13 hours ago, ssj92 said:

Looks like I got the CPU for $1,195 plus tax, not bad considering a 285K is like $600. 

 

If you got 34xx/35xx CPU definetely get the sage motherboard. I've never seen so many BIOS options ever in any other board. Also you get octa-channel. 

 

If you get the 24xx/25xx CPU then get a ASRock board for like $600. The Sage is $999, I got it for 949, but it was on sale for 899 recently. 

 

24xx/25xx has 64 lanes, 34xx/35xx has 112 lanes. I think it's worth going 34xx/35xx because every pcie slot is 5.0 x16 (except one @ x8 only because you get two M.2 PCIe 5.0 x4 slots). 

 

I don't think the wife would let me have a chiller in the living room LOL. But I do want to do a custom loop. 

 

I've only done a custom loop once, but I'm assuming having 4x 480mm radiators would still be beneficial over 2 x480mm radiators? Or does it reach a diminishing returns?

You can start with just a single HWlabs GTX or GTR rad. I tested out a HWLabs 280MM GTX once that someone sent to me, and was absolutely blown away at how effective they are. Just one of these 240-280mm HWlab radiators does what two or three common brand (360mm) rads can do. 
 

The GTR is more optimized for louder higher RPM fans, so it will scale and cool slightly better if using some high RPM 2K+ fans. Whereas the GTX model is practically just as good, but better suited to 800-1800rpm fans, and going with faster RPM will not scale cooling ability anymore. All about what you need noise wise I think.
 

But since you have the new Corsair 9000 case, definitely (2-4) Hwlab 360’s or 420’s or 480’s would be pure insane case cooling which is what you’d want for such a system like this. Just know that a single HWlab 240-280mm can already effectively cool a overclocked 10900K+ overclocked 3090 Kingpin just as good as (3) 360mm EKWB SE classic rads. If one is not using some behemoth external radiator, or a big loud chiller, these radiators are really the only thing I would use if building inside of a case for absolute maximum cooling performance. 
 

If you are trying to save some money on loop cost, then really just one of these Hwlab 480 rads would do the trick, and you can add more later or never lol. 

[ssj92]

13 hours ago, tps3443 said:

You can start with just a single HWlabs GTX or GTR rad. I tested out a HWLabs 280MM GTX once that someone sent to me, and was absolutely blown away at how effective they are. Just one of these 240-280mm HWlab radiators does what two or three common brand (360mm) rads can do. 
 

The GTR is more optimized for louder higher RPM fans, so it will scale and cool slightly better if using some high RPM 2K+ fans. Whereas the GTX model is practically just as good, but better suited to 800-1800rpm fans, and going with faster RPM will not scale cooling ability anymore. All about what you need noise wise I think.
 

But since you have the new Corsair 9000 case, definitely (2-4) Hwlab 360’s or 420’s or 480’s would be pure insane case cooling which is what you’d want for such a system like this. Just know that a single HWlab 240-280mm can already effectively cool a overclocked 10900K+ overclocked 3090 Kingpin just as good as (3) 360mm EKWB SE classic rads. If one is not using some behemoth external radiator, or a big loud chiller, these radiators are really the only thing I would use if building inside of a case for absolute maximum cooling performance. 
 

If you are trying to save some money on loop cost, then really just one of these Hwlab 480 rads would do the trick, and you can add more later or never lol. 

I was thinking of going Corsair Hydro XR7 480mm X2 along with their D5 pump/res combo and an EK water block since there's only like 2 water blocks for lga 4677. 

 

Looks like HWLabs is good too. Any recommendations for pump/res combo? If i went 2x480mm would a single pump/res combo be enough or would 2 be better? I was going to get the Corsair Hydro X hardline 14mm tubing along with the gold fitting pack but I'm all ears to what is good these days. 

 

I think 2x480mm radiators on top and 8 noctua fans should still be quiet enough and cool this thing better than the current air cooler easily. 

 

EDIT: Apparently the XR7 from Corsair is built by HWLabs (GTX Nemesis OEM). 

 

I'm also debating on whether I want to go hardline tubing this time and or just get soft tubing.

 

This is what I was looking at originally:

 

 

[jaybee83]

20 hours ago, ssj92 said:

I figured since we're having our first baby in February now is the time for me to build my beast before it's too late lol. 

 

I bought a Intel Optane P5800X 400GB SSD (U.2 form factor). It has the Dell EMC branding. Got it from eBay, it was brand new. Cost me $450 which is expensive but I'm using it as a boot drive. Thinking of going ASUS Hyper M.2 4x card for 4x NVMe drives RAID0 or RAID0+1 for my secondary drive. Right now I have SK Hynix 2TB P41 and a 16TB HDD + 10TB HDD (WD Red/WD Gold).

 

My motherboard has SlimSAS ports so I bought a SlimSAS to U.2 cable. It shows up in bios/windows as any ordinary NVMe drive. You can even get a M.2 to U.2 adapter as well. The P5800X is a PCIe 4.0 x4 drive, it's the last/fastest Optane drive made as far as I am aware. I only install OS/Apps on the Optane drive. Everything else will go to the other SSD. 

 

There's also the P1600X which is essentially the same thing running at PCIe 3.0 x4 instead. It also has the latest Optane memory as well. 

 

 

i know EXACTLY the position ure in, i got my build right before our little one came along, as well haha 😄 get in all the building and tuning u can before ure a dad!

 

nice, so hows the experience with the P5800X so far? how does it compare with a regular SSD as an OS drive? does it actually provide any real life difference?

[ssj92]

Anyone interested in a Zotac RTX 4080 Super White GPU? lol I didn't realize finding a water block for it would be this difficult. Too bad all FE cards are sold out. 

 

  

8 hours ago, jaybee83 said:

 

i know EXACTLY the position ure in, i got my build right before our little one came along, as well haha 😄 get in all the building and tuning u can before ure a dad!

 

nice, so hows the experience with the P5800X so far? how does it compare with a regular SSD as an OS drive? does it actually provide any real life difference?

Everything feels snappy and smooth. Things load up instantly. Unzipping a file with hundreds of small files is fast. 

 

Restarting, windows update, etc is fast. 

 

So yes there is a noticeable difference, but most people probably can't justify the price per GB compared to a PCIe 5.0 or 4.0 NVMe ssd. 

[Clamibot]

8 hours ago, jaybee83 said:

 

i know EXACTLY the position ure in, i got my build right before our little one came along, as well haha 😄 get in all the building and tuning u can before ure a dad!

 

nice, so hows the experience with the P5800X so far? how does it compare with a regular SSD as an OS drive? does it actually provide any real life difference?

As an owner of an Optane 905P, I feel qualified to answer this question.

 

Depending on what you're doing and your setup, you may or may notnotice a difference.

 

If you use Optane with something like an i7 7700K, you probably won't notice a difference vs a standard m.2 SSD. If you are however using Optane with a recent platform (like 14th gen or current gen), you will definitely notice a significant difference. I currently have an Optane 905P installed in my system with a 10900K in it, and the difference is significant.

 

The first thing you'll notice is that the system feels more responsive. I can't assign this particular metric to a number, but it feels snappier vs using a standard SSD. For everyday usage, programs load significantly faster (provided your CPU isn't a bottleneck on load speeds). You can also open a ton of programs at once and the Optane drive will just blast through your file read requests. Optane also excels at small file copy speeds due to the much faster random write speeds vs a standard SSD. Optane also doesn't slow down as it fills up vs a standard SSD, so you can load these babies to the brim and not see a decrease in drive performance.

 

The most major difference I've noticed is in file search speed. When doing development for my job, I osmetimes have to look for particular files. With Optane, I can search the root directory of a Unity project using windows explorer file search (mind you, our projects are pretty big for VR games, at least 30 GB or larger for the repository), and my 905P will have already returned a bunch of results after I snap my fingers (it's still searching, but at least it found a few files right off the bat). File searching is so much faster on an Optane drive. If I were to perform this same task on a standard SSD, it would take a bit before the file search returned any results, even the initial few.

 

For my development workloads, code compiles faster, asset imports complete significantly faster, and builds complete a bit faster. For gaming, games load faster, especially open world ones. Any game that does heavy asset streaming also has loading microstutters gone. Both development workloads and game load speeds will continue to scale with ever faster CPUs on Optane whereas they've already kinda hit a wall with standard SSDs.

 

Oh yeah, also hibernate and wake from hibernate is far faster on Optane vs a standard SSD. So Is file zipping/unzipping.

 

So overall, Optane is a must as a boot drive if you want the snappiest experience, or if you're a developer like me, or just want the best game load times, or if you do tons of file operations (especially with small files), or if you want some combination of the 4. Optane benefits newer platforms far more than older ones as newer CPUs can really take advantage of the throughput of Optane random read and write speeds.

[Mr. Fox]

Finally had a few minutes to get Linux up and running on the Ryzen build.

[Papusan]

On 10/23/2024 at 7:38 PM, Papusan said:

Intel's CEO Pat. Gelsinger working hard for Intel......

 

On 3/9/2022 at 12:47 AM, Papusan said:

Apple double up the cores on their next Cpu. Both for  the real P cores and the wimpy small efficiency cores and make an combo of 16 performance cores and 4 efficiency cores. Intel goes their own retarded way and will only double up the efficiency cores for their refreshed Cpu to make an weird 8 P / 16 E cores Hybrid combo.

 

I can clearly see Core Ultra/Arrow Lake pay off. The best selling Intel chips is 3 years old. What happens when Intel render Raptor Lake EOL ? Do as Nvidia and rehash old silicon as new SKUs to keep them barely floating? Otr can an possible Bartlett" LGA1700 Processor for 2025 save them from total failure/disaster? You can't survive as company if you haven't products people want. 

 

And the server market starting fail as well. What then?

AMD dominates chip sales on Amazon — top ten best selling CPUs all come from Team Red

And you won't sell more of the flopped chips when you let stupids set the prices on new stupid overpriced products. Yup, the new Core Ultra mobile chips matching the computer Jokebook (ASUS dual-screen laptop with Core Ultra 9 285H CPU listed for over $3,700).

[tps3443]

@win32asmguy

 

Hey what 10900K LTX Gold Sample bin did you end up with? SP rating? How are the VID’s? I have a buddy trying to get us both some as well. Fingers crossed. 😊

[win32asmguy]

30 minutes ago, tps3443 said:

@win32asmguy

 

Hey what 10900K LTX Gold Sample bin did you end up with? SP rating? How are the VID’s? I have a buddy trying to get us both some as well. Fingers crossed. 😊

 

SP106

8x 0.829v

25x 0.829v

35x 0.944v

43x 1.049v

48x 1.139v

51x 1.254v

52x 1.334v

53x 1.349v

 

It is already better than the previous one I was using by a good margin. Probably needs a delid and testing undervolt.

[tps3443]

1 hour ago, win32asmguy said:

 

SP106

8x 0.829v

25x 0.829v

35x 0.944v

43x 1.049v

48x 1.139v

51x 1.254v

52x 1.334v

53x 1.349v

 

It is already better than the previous one I was using by a good margin. Probably needs a delid and testing undervolt.

Thats really awesome! So long story short, friend of mine found a few of these for-sale  from a guy he knows, and this guy has these below, my friend was trying to work out the deets for us to each get one. I was leaning toward one of the SP101 chips.

 

SP89

SP92

SP99

SP101

SP101

SP105

SP106

SP107

SP116.

 

Oddly enough the SP89 was actually the best VFcurve wise and cache OC prediction in the whole pack 🤷‍♂️. 
 

I can only imagine how good one of these is. Below is a SP84 or SP85 (10850K) that I sold to @Mr. Fox a while back and that chip was A pure BEAST for being just a 10850K lol. So I’m dying to test an SP100+ LTX Golden sample 10900K. 😎

 

 

[cylix]

Looks like Asrock entered the PSU Market. The OEM behind  should be seasonic.

 

https://www.vortez.net/news_story/asrock_enters_power_supply_market_with_its_lineup_of_atx_3_1_and_pcie_5_1_compliant_psus.html

[Mr. Fox]

1 hour ago, cylix said:

Looks like Asrock entered the PSU Market. The OEM behind  should be seasonic.

 

https://www.vortez.net/news_story/asrock_enters_power_supply_market_with_its_lineup_of_atx_3_1_and_pcie_5_1_compliant_psus.html

I think they are the brand to watch now. I'd love to see them displace A$$zeus in the mobo, GPU and PSU space. They've come a very long way in the past 2 or 3 years.

---

Winduhz 11 just cannot overtake Windoze 10. It's getting close, but it's not quite there. Nor shall it ever be.