Finally the new RTX MXM cards will work in our laptops!

[JadeRover]

On 12/8/2025 at 9:31 AM, Derpmaster69 said:

@SuperMGJust saw that XVSION has made an RTX 3050 6gb MXM a card. Wonder if it will work on my zbook 15 g2-atleast in hybrid mode?(I think the eDP is on C in the 15 g2). As I've heard, only up to turing cards would work. Will there at least be a modified vbios for a DP_C output?

 

Hi, yes the card will work in hybride mod, you'll loose a little bit of performance due to routing the display signal through the iGPU.

 

I used a 1060M that had HDMi on DP_D (laptop booted with black screen in discrete GPU mode, booted fine in hybride mode and 1060M was recognized and used for games)

 

Not sure the external display outputs will all work well, we'll have to look up the schematic of your model to make sure wich external display connections have a mux switch meaning the iGPU will run the external connections as well.

[zex4]

Say hello to the Blackwell mxm cards 😅

https://www.aetina.com/about-news-detail.php?i=1261

[Tetsu]

12 hours ago, zex4 said:

ブラックウェルのmxmカードにご挨拶を😅

https://www.aetina.com/about-news-detail.php?i=1261

It would be great if they sold to individual customers too.

[SuperMG]

On 12/19/2025 at 9:42 PM, zex4 said:

Say hello to the Blackwell mxm cards 😅

https://www.aetina.com/about-news-detail.php?i=1261

The heatsink mounting are so crappy... Why do they do this?

 

None of our heatsinks would be compatible, even by modifying the offset. It's so spacced out...

[dickcheneyx]

Has anyone done this for a X170, was debating grabbing a 4090 card but the heatsink comments have me out of depth on this. 

[SuperMG]

8 hours ago, dickcheneyx said:

Has anyone done this for a X170, was debating grabbing a 4090 card but the heatsink comments have me out of depth on this. 

Not yet. But yes the heatsink needs to be modified. RTX 4070, 4080, 4090 worked on the P775TM. For 4080/4090, ZRT/Enbik are prefered brands because of their VBIOS (DP/DP/HDMI/eDP, enabled eDP and not disabled eDP, otherwise blackscreen after drivers installation)

[dickcheneyx]

On 12/28/2025 at 6:06 PM, SuperMG said:

Not yet. But yes the heatsink needs to be modified. RTX 4070, 4080, 4090 worked on the P775TM. For 4080/4090, ZRT/Enbik are prefered brands because of their VBIOS (DP/DP/HDMI/eDP, enabled eDP and not disabled eDP, otherwise blackscreen after drivers installation)

Thanks for the reply, i would have no idea how to modify the heatsink unfortunatley.

[SuperMG]

Hello. I still have some backlight eDP mod cable available. Available on ebay. Support would be helpful.

 

The mod won't work on Dell M6700 with Dreamcolor LVDS display. eDP to LVDS doesn't work because the GPU doesn't understand what screen type it is. I couldn't try on pure-eDP because I can't find the 3D cable