clevo p870tm/tm1-g Official Clevo P870TM-G Thread

[Maro97]

On 6/13/2026 at 3:47 PM, mickey said:

Hi Maro,

 

can you share me the link to your Firestrike Score online to check them more deeply. I like your temps by the way!

 

I'm limited by my ram, only 2800 cl16...

Unfortunately, I wasn’t online while the benchmark was running, so I took a photo of it with my phone at the time

[zerokool]

I modded my vapor chamber a different way . I installed a second GPU ( 1060 ) on the other side . Disabled it in the bios m used the mounting pressure from that card . Got a piece of spring steel and tightened it on the 3080 to side and it's been cool . Idles in the 30d and 40s and hits at most 76 c full snot . It's a 200 watt card too lol 

[farawaythrower]

I am a proud new owner of a P870DM-G! Though,do I need to modify the CPU pins on the QTJ1 for compatibility on my LGA1151v1 (formerly 6700k was installed)? What thickness of washers will I need to compensate for the CPU's extra Z-height? Where do the washers go?
Ive attempted to install the QTJ1 but my P870DM turns off when I attempt to turn it on with it installed.
EDIT:
I've figured out where to put the washers (under each of the 3 socket torx screws), and the shut-off issue being due to incompatible BIOS (missing microcode & ME issue)

Edited yesterday at 09:28 PM by farawaythrower

[zerokool]

On 7/23/2026 at 5:17 PM, farawaythrower said:

I am a proud new owner of a P870DM-G! Though,do I need to modify the CPU pins on the QTJ1 for compatibility on my LGA1151v1 (formerly 6700k was installed)? What thickness of washers will I need to compensate for the CPU's extra Z-height? Where do the washers go?
Ive attempted to install the QTJ1 but my P870DM turns off when I attempt to turn it on with it installed.
EDIT:
I've figured out where to put the washers (under each of the 3 socket torx screws), and the shut-off issue being due to incompatible BIOS (missing microcode & ME issue)

This machine holds up so well especially with the QTJ1 . Mine at least doesn't instant hit 92 c when over to 4.8 all core with single core 5.2 and dual 5.0 it hits 84 c fully loaded . The only gripe with the p870tm1 even gsync is 75 hz screen limit that has terrible pixel response time 

[farawaythrower]

The main obstacle so far with my P870DM-G is probably the CPU cooling solution. Even with a vcore offset of -150mW, lapped IHS, power limited to 90W, Im still seeing the CPU throttle to 80W under load and peaking at 98C in ycruncher (2 threads disabled in the screenshot). It'd be great if I could utilize more of the QTJ1's performance until I hit the ceiling of the VRM is capable of.
I've read that I could use the P870TM vapor chamber CPU cooler with some mods for fitment in this chassis? And that there is a user on the forum called Developer that does custom vapor-chamber mods for these laptops?