Jump to content
NotebookTalk

nforce4max

Member
 View Profile  See their activity

  • Posts

    170

  • Joined

  • Last visited

 Content Type 

Everything posted by nforce4max

  1. nforce4max
  2. nforce4max
    To me and some out there that are conspiracy oriented this is setup to be a trap while most out there see the trillion dollar bubble soon to pop that will lead to industry consolidation. Societal implications beyond the immediate tsunami of job losses is the dependency trap both for work and for everything else where people give up their autonomy ultimately allowing for even further top down control over society.
  3. nforce4max
    I got two with the second being a doa on the cheap and I got them on eBay however I've been out of the loop for over a year when it comes to second hand mxm cards until the last couple days so yes there is a lot less available than there was a year ago. There is a source for these cards however one has to scrap a good laptop in the process which isn't economical.
  4. nforce4max
    I swapped the card out for an HP RTX 3000 January last year so I'll see if I got the vbios somewhere. I didn't have any issues with the switchable graphics with neither card though that could easily be just my machine though.
  5. nforce4max
    One of the unwritten rules of capitalism is always pass the cost onto the poors or in other words socialize the losses.
  6. nforce4max
    This crap could drag on for decade or two before society moves on to something else and there is no tell the damage that will be inflicted till all said is done.
  7. nforce4max
    I would assume that it does have eDP but you could look around here on the forum for any examples where this card was paired with that display type or not.
  8. nforce4max
    HP as the Aetina is fairly rare in the states and doesn't regularly appear on ebay. It shows as being Dell in gpu-z even though I've made no changes to the vbios.
  9. nforce4max
    I have and hotswap works however expect an blue screen once in a while. The performance isn't great being pcie 1x at 2.0 but still handy for moving files on/off much older laptops while serving as extra storage. The adapter itself could be better when it comes to build quality.
  10. nforce4max
    I believe that is the D version.
  11. nforce4max
    Someone here got 16gb modules working on an M6800 however the real issue is the cost as very few are going to pay around $200 a module just to hit 64gb.
  12. nforce4max
    One of the M4800s I've bought had the 4940mx from factory and they do turn up with the 4930mx as well on eBay time to time however thermal performance isn't great but still tolerable.
  13. nforce4max
  14. nforce4max
  15. nforce4max
    I have to wonder what features are going to be lost from this new generation forward, don't like clunk pads and non serviceable keyboards.
  16. nforce4max
    Original unless the seller flashed it and didn't state it in the listing, bought it on eBay for around $200 give or take over a year ago.
  17. nforce4max
    HP as that was the only cards I could find that were not too costly.
  18. nforce4max
    Doesn't surprise me, they've done the whole skimpy pipes on low spec coolers bs as well which can really hurt cpu side.
  19. nforce4max
    I've only come across horror stories of those adapters going bad killing boards and panels so r.i.p there. You would need the schematics and the tools to figure out what went wrong then fix it. Hopefully if you are in luck not too much got shorted.
  20. nforce4max
    When it comes to heatsink one could get lucky provided the screw mounts are the same otherwise be ready to spend more ontop of buying the card.
  21. nforce4max
    For that kind of money one may as well just get an RTX 5000 just to be done with it. $1200 is just dumb and I would move on to another project.
  22. nforce4max
    M6700 has the option of using either as there is a connector for both so panel swapping is much better than on the M6800 for example.
  23. nforce4max
    The WX7100 works in this model with the 120hz panel just fine as I've daily used this setup for about two years before upgrading to an M6800 reusing the same card with that machine as it was also edp. W7170M and the WX7100 from the 7710 and 7720 work almost flawlessly with the exception of the W7170M being thicker.
  24. nforce4max
    Yes I am using the HP version, I typically avoid LVDS models but have bought some by mistake over the years. Might work but I am not expecting it to work in this case. The card works really well with EDP M6800 that much I can vouch for and the same is very likely true for the M6700 with an edp panel.
  25. nforce4max
    The first gen RTX series works with EDP and had zero issues with my M6800 aside from needing to mod the heatsink so there is a chance it could work with your M6600. This card doesn't dump too much heat so it should be fine once everything is installed right.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use