Tetsu
Member-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Tetsu
-
This BIOS is named "P570WM37.PM5," so it should be possible to flash it on a model that does not support 3D Vision. The 3D Vision-compatible model uses "P570WM337.PM5." As a precaution, we recommend backing up your current BIOS before flashing it. Also, because this BIOS supports 64GB, you may encounter the error "1394 GUID are invalid in both CMOS and FLASH" after flashing. If you encounter this error, please refer to the Readme file within the BIOS file for instructions on how to resolve it. As you may know, a failed BIOS rewrite can damage your laptop, so please consider this carefully before proceeding. "We cannot be held responsible for any failures."
-
Excuse me, but could you please ask Buffermod how to update the BIOS? I've tried contacting them on X (Twitter), but I haven't received a reply.
-
Does the 1394 ID update mean that it supports 64GB of memory? Or should I just run the "update bat" like a regular BIOS update?
-
I'm confused because the term "1394 ID" is unfamiliar to me.
-
No, I don't have it. I'm currently checking the sales website. I haven't flashed the BIOS yet.
-
The update procedure should be in the Readme file. It's best to check it before proceeding. I also plan to check the Readme file before flashing.
-
Hello. Has the BIOS on your P570WM been updated? It should work without problems using Rufus. Since the Readme is a .doc file, I don't have the corresponding application, so I'll try running it once I find a compatible application and check its contents.
-
Thank you very much!
-
I've conveyed the content of the comment. I don't expect a reply, though...
-
Hello. That person's account name is BufferMod. You should be able to find it easily by searching on X.
-
It seems someone on X (Twitter) has created a ModBIOS that supports 64GB RAM. They were trying to submit it to PremaMod. I tried contacting that person, but received no reply.
-
I have a question regarding the P570WM: Does the PremaMod 1.03.07 V5 BIOS not support 64GB of RAM?
-
I have a damaged LVDS motherboard. It won't boot. I'm currently on Hachijojima Island, so I can't go to the warehouse on the mainland to pick it up. You can still find eDP-type motherboards for sale on eBay, but they're quite expensive.
-
Precision M6800 questions and upgrades
Tetsu replied to Jers6410's topic in Pro Max & Precision Mobile Workstation
I found a ZRT-made RTX 4090 on a site called "Ali1688," separate from Taobao. However, I'm not sure about its legitimacy. The picture shows it as a ZRT product, but since others have been deceived, I can't just buy it without careful consideration. -
Precision M6800 questions and upgrades
Tetsu replied to Jers6410's topic in Pro Max & Precision Mobile Workstation
Thank you for your reply. I would also like to purchase directly from ZRT. Could you please provide the contact information for a ZRT representative? Contact email address: *****@*****.tld -
Precision M6800 questions and upgrades
Tetsu replied to Jers6410's topic in Pro Max & Precision Mobile Workstation
The contact information appeared garbled. -
Precision M6800 questions and upgrades
Tetsu replied to Jers6410's topic in Pro Max & Precision Mobile Workstation
Thank you for your reply. I would really appreciate it if you could also provide me with the contact information for the ZRT representative. I hope to be able to purchase directly from ZRT. Contact Information Free email address: *****@*****.tld -
Precision M6800 questions and upgrades
Tetsu replied to Jers6410's topic in Pro Max & Precision Mobile Workstation
Hello, nice to meet you. Have you received your ZRT 4090 card? Actually, I was planning to buy one from Taobao as well, but I canceled the purchase due to moving and other circumstances. It seems that Taobao sometimes sells products with ZRT photos but the actual card inside is an X-Vision. This happens frequently with online shopping. There have even been cases where RTX 5090 cards had their internal components replaced with pebbles. -
Hmm, I'm not entirely sure, but I suspect ENBIK's MXM cards use the same VBIOS as X-vision. The price isn't listed on ENBIK's website, so I'm not sure if I can buy it, but I'll try to purchase it using an import agent.
-
Need help for editing or getting VBIOS for 4080M and 4090M MXM
Tetsu replied to SuperMG's topic in Components & Upgrades
Hmm, I'm not entirely sure, but I suspect ENBIK's MXM cards use the same VBIOS as X-vision. The price isn't listed on ENBIK's website, so I'm not sure if I can buy it, but I'll try to purchase it using an import agent. -
So, does that mean the only RTX card that could potentially be used is the ENBIK?
-
That's right. Was the VBIOS for the ZRT RTX4090 the same as X-vision? Does this mean that ZRT cards cannot be used with the P570WM? Unfortunately, we do not have any surplus stock of the P570WM.
-
Hello. I found this item on eBay. What are the performance specifications of this graphics card? Here's the eBay link: https://www.ebay.co.uk/itm/375902854110?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338722076&customid=&toolid=10050
-
Hello. eDP motherboards are currently being sold on eBay. They're safer than modifying an LVDS motherboard. You'll need an eDP cable and an eDP-compatible display, though.