Mr. Fox

Welcome back. Cool analog gauges. Would be nice to have them mounted in a combined console instead of separate. Would be cool attached to the bottom or top of a monitor. It looks like the lighting changes from green to red based on the temperatue or load. Other than that insanely overpriced EVGA open frame tubular bench I don't think I have seen gauges for PC like these before. I like them, too. Very nice.

Happy Easter, everyone. He is risen! Here is some humor for you. Good thing Tony and Alex are friends, LOL.

Probably not if it is weighed in ounces/grams, is 3mm thick, uses a USB charger and has a TGP of 15W.

AMLO needs to do the same thing we need to do. It's time that both of our nations take this problem seriously. Our future and survival as neighbors depends on it. Seal the borders. Enforce the law. Give the orders. Fire at will. Shoot to kill. Dead trespassers can't commit crimes against the citizens of our nations. Protecting our borders and all who legally reside within them is the responsiblity of our military and Commander-in-Chief. Our incompetent loser POTUS needs to be court martialed. His dereliction of duty is a breach of trust and a betrayal of every legal inhabitant of this nation.

Those are all Dell products, so refresh is the only alternative since upgrades are out of the question.

I honestly don't believe it is split that even, but the narrative is spun in a way that creates that impression in an effort to normalize the abnormal and make the unacceptable more palatable. I think the population that holds a traditional perspective on things is more like around 80%. The concentration of corruption is in the entertainment, government, public education and technology sectors and there is it probably like a 90% concentration of corruption. The army of lefty trolls on social media also helps create an impression of normalcy, but they are a minority of the population. They're just part of the cluster of idiocy that does consitutute a larger percentage of those that waste a significant percentage of their time with social media. The unfortunate part is the brainwashing effect it has on the young and stupid.

I do not believe there are any trustworthy politicians. Some are obviously far worse than others, but all are beholden to campaign contributors. Even those that I prefer and would vote for. One thing is for certain. As long as there are woke lefty, freedom-hating, anti-American, anti-family, taxes-r-us, open border devil-worshippers holding office things will only continue to decline. When they hit the bottom, they just dig deeper and lower the bottom. A nation divided will not stand, and nobody wants to stand with the abnormal extreme left whack jobs. Some of this (especially the first two) is unacceptable and should not be tolerated. Abuse the legal system and fabricate lies to wrongfully prosecute and steal from those you disagree with... A call to pull our heads out... too many won't. Too many are more worried about the color of the car to pay attention to the dangerous road they are traveling. They be driving off the cliff before they realize the problem wasn't the color of the car. Thanks, Joe... Build the wall. Empower the border partrol. Enforce the laws already on the books. The use of lethal force will stop it. The problem at the Mexican Border is not the people of Mexico. It is the cartels, criminals, drugs, human trafficing and people not from Mexico that are illegally entering.

https://hwbot.org/submission/5522789_ | https://browser.geekbench.com/v5/compute/6740847 https://hwbot.org/submission/5522800_ | https://browser.geekbench.com/v4/compute/5232934

I do not run air cooling on my desktops. CPU, GPU and RAM are liquid cooled on both of my large desktops and my mini-ITX system has the CPU liquid cooled. I suppose if I got ambitious I could try some on my A770 one of these days. It still has the stock thermal paste.

It's actually easier to take apart my cell phone, LOL. I have replaced the glass back on my OnePlus 8T twice in the past year and it's easier to do that than it is to replace thermal paste on a laptop, which is actually kind of absurd when you think about that. It's glued together and not supposed to be user-serviced, but it still requires less time and effort. And, yeah... having a glass back on a cell phone is about as idiotic as an idea could possibly ever be. Ludicrous. crApple made having brain damage and doing stupid stuff very popular.

Maybe one weekend when I don't have something that needs to be done I will tear apart my Precision 7720 and put some of the PTM 7950 termal paste I have on it. That's why I bought the PTM 7950 to begin with. I just haven't mustered enough desire to be bothered with the hassle. Whenever I need to use it I am always "impressed" by how hot it runs. I should put some on my wife's laptop (Eluktronics Mech 15). That sucker has always been a hot mess. It takes a lot for me to feel motivated to work on either one. The Mech 15 is much easier though. Just a few screws to remove the bottom cover and everything is accessible. But, it's demoralizing working on laptops to me now. The Dell, of course, makes everything much more of a pain in the butt than it needs to be. Everything involves lots of unnecessary screws, cables and foolish rigmarole. Build quality 10/10. Intelligent, user-friendly design 1/10.

The reason IC Diamond and PTM 7950 work so well is they are thick enough to fill all of the gaps and help make up for poor contact. Coincidentally, that is also the reason why liquid metal often does not work well for laptops. The poorer the fit of the heatsink, the more beneficial IC Diamond and PTM 7950 will be. What they lack in thermal conductivity is made up for in enhanced contact. I would not worry about that. Tearing the thermal pad doesn't matter and your installation should work as well as if it looked pretty. Once it melts it will work the same as if looked like a perfect CGI rendering from the start. How it looked before it melted will be irrelevant. Very simple. I got fed up with the crappy control-freak shenanigans and the shift in focus to thin and light dung, long battery life, low power consumption and castrated firmware and poor quality control. Once I dipped my toe back into desktop waters there was no going back again. There was a period of golden years for laptops, where they came within striking distance of an air-cooled desktop performance, but that era came and went. BGA ushered in the era of disposable compromised filth. Now laptops are only a marginal improvement over a cell phone with a keyboard. They might perform better than a cell phone, but they're designed in the same pathetic manner. Using a touchpad is as miserable as a touch screen. The only benefit in my mind is a larger screen and a real keyboard. If you're going to connect an external monitor and keyboard, then you may as well have a decent desktop to connect them to. Use the turdbook when your external monitor and keyboard are not available. Leave it turned off the rest of the time. That's how I roll now... only when necessary. Never because I prefer to. The friendships that were built when laptops were respectable have lasted and I will take them to my grave. But, the original reason those friendships were formed is as dead as a doornail now.

I used to run distilled water with an antimicrobial additive. I cannot identify any benefit to that. Automotive coolant is a superior alternative. It requires no maintenance. I have a laptop that I use once in a great while. I sometimes forget that I have it. I don't hate laptops as much as I do smartphones, but I do find both are pretty miserable products in general. I won't use either one if I have access to my desktops. Neither of them will be replaced until they stop working because upgrading either one is a waste of money. I won't even use my smartphone for text messaging if I am at a computer because I loathe touch input so much. (I use Google Messages on my desktop instead of the phone.) The idea of owning a touch screen laptop makes me feel like punching someone. That looks nice, bro.

Aim to Head always has sensual cover art. They probably get YouTube subscribers for no other reason. Seems to be common with Techno artists in general.

Fans wear out, but 2 years isn't very long.

It works well for laptops with poorly fitting heat sinks. I tried it on a water cooled desktop and it was inferior to most of the popular thermal pastes. I do not think it is great in terms of thermal conductivity, but it is good at filling gaps

The renaming is only necessary for recovery flashback using the button on the rear I/O. You can flash it inside the BIOS with the original file name. I really do not like how ASUS handles their firmware. It is the worst. The dual BIOS is a joke. It is not a real dual BIOS. That is why when you switch BIOS using that button it goes through a reflashing sequence. If it were a proper dual BIOS it would have a switch that disables one chip and enables another and they would function independently of one another. Because of how they did it, it is not brick-proof. And, one BIOS position is not completely agnostic of the other. It is not a very smart way of doing things. The only right way to do it is how EVGA did it, and how it is done on GPUs. You slide the switch and the other one no longer exists. The ME and EC are not shared from common NVRAM. ASUS used to do it that way. I am not sure why they thought it would be better to do it this way now, but it sucks. The way it was on the X299 Dark was the best, having at least one SOP8 chip in a socket so you could swap out spare chips and manual flash them with an SPI programmer was so sweet. I put one of those sockets on a couple of laptops and it worked flawlessly. That is a truly brick-proof system. Solder once and you're forever free to make your own decisions about what firmware to use.

https://hwbot.org/submission/5520984_ Completed all 4 passes with CPU in parallel mode. Parallel mode stresses the memory with all cores simultaneously rather than rotating amongst the cores.

Yeah, I have historically not liked them at all, but the past couple of GPUs were well made (including my A770). I had a Thai Chi (Chai Tea) motherboard several generations back and is was a sucky, flimsy piece of trash. I do not like their warranty policy. You have to first try to go through the place that you bought it from. Sounds like a slow process, especially if the place you bought it from is a bunch of losers. I think (don't hold me to it) that their warranty is only to the original buyer. If you buy one used in warranty, you're not covered. It doesn't follow the part like most other brands do. If they're open to change and improvement, the former EVGA employees might be exactly what they need to go to the next level. Here's hoping they give the dimwits at ASUS a run for their money.

Either they were not thinking, or they were and it was a deliberately nefarious decision.

That is an amazing first PC. What a blessing that so many parts were donated.

I hope that both of you get back to feeling good again. Seaonal allergies are bothering me right now, but compared to what is bothering both of you that is hardly worth mentioning.

Same with both of my systems. It's not actually "Auto" as much as what they decide to set as the default value so that the most horrible CPU silicon will run without lockups and blue screens. It's not "intelligent" at all. They call it "Auto" and what it really means is "ASUS BIOS Default" value. It has to work for 99% which means it's way more than necessary for probably at least half of the systems, maybe even more than necessary for +80% considering some people are content with 6800 or 7200. The lowest common denominator gets accounted for. If I set mine to 1.250V under load the actual IMC VDD is 1.225V. I haven't tested this on the 24GB A-die modules, only the 24GB M-dies. The M-die uses lower voltage all the way around. Totally stable with the TeamGroup Xtreem 8200 bumped to 8400 and 1.435V. CL38-49-49-84 2T tRFC 700 tREFI 131071.

I'm having issues with having so many bios options set to auto. Can be perfectly stable for a while. Then if I power the system off and leave it for a while and then come back to it and turn it back on it's no longer stable and I have to go back to my old manual overclock settings. I've had this problem off and on over the years with vatious systems, which is why I usually set all values manually and use static voltage values. Then my systems behaves the same all the time even if it might be getting a little bit more voltage and drawing more power than what it needs it behaves more reliably. In some respects it is the same, or the opposite, as pushing a system to the edge of stability on the overclock, or pushing the undervolt to the edge of stability. In either circumstance the edge of what works and what does not moves based on temperature, and unless "auto" works 100% of the time, (regardless of environmental changes,) there will be times it does not work.