Etern4l Posted November 8, 2022 Share Posted November 8, 2022 4 minutes ago, Mr. Fox said: But, it is still not clear how or why the ethernet port itself would be carrying enough current to cause what happened. Very strange. I assume the current would increase with the length of the cable (Ohm's law), but not sure what absolute levels we are talking about here. Bear in mind, the individual wires are quite thin. BTW way back you'd need a special crossover cable to connect computer to a computer, but it shouldn't matter these days, assuming the other PC is reasonably recent. 1 "We're rushing towards a cliff, but the closer we get, the more scenic the views are." -- Max Tegmark AI: Major Emerging Existential Threat To Humanity Link to comment Share on other sites More sharing options...
ryan Posted November 8, 2022 Share Posted November 8, 2022 maybe both ends were inputing power ZEUS-COMING SOON Omen 16 2021 Zenbook 14 oled Vivobook 15x oled Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 8, 2022 Author Share Posted November 8, 2022 Given that the outer metal housing around the end of the connector is what looks to have been shorted, it almost looks like it was putting power to ground. Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
ryan Posted November 8, 2022 Share Posted November 8, 2022 my new beast laptop 4 ZEUS-COMING SOON Omen 16 2021 Zenbook 14 oled Vivobook 15x oled Link to comment Share on other sites More sharing options...
electrosoft Posted November 8, 2022 Share Posted November 8, 2022 Something to play around with later even though I still have the A380 on the shelf too.... 3 4 2 Electrosoft Prime: SP109 14900KS | Asrock Z790i Lightning | MSI Suprim X Liquid 4090 | AC LF II 420 | TG 2x16GB 8200 | Samsung 990 Pro 2TB | EVGA 1600w P2 | Phanteks Ethroo Pro | Alienware AW3225QF 32" OLED Heath: i9-12900k | EVGA CLC 280 | Asus Strix Z690 D4 | Asus Strix 3080 | 32GB DDR4 2x16GB B-Die 4000 | WD Black SN850 512GB | EVGA DG-77 | Samsung G7 32" 144hz 32" My for sale items on eBay. Link to comment Share on other sites More sharing options...
electrosoft Posted November 8, 2022 Share Posted November 8, 2022 3 hours ago, tps3443 said: I plugged a long Ethernet cable in to my computer from my wife’s work computer. So I could provide internet access to her system. Well, right after I plugged this Ethernet cable in it began liquifying the rubber housing on the Ethernet cable, I couldn’t unplug it because it was now stuck inside of the Ethernet port. My Unity-X started getting really really really hot in the I/O area. Then in the moment of panic and imagining cooking 13900K’s my PC completely shutdown on me, then I realized my chiller LCD was shut off too. I lost power to half the house as well. I flipped the breakers off and back on, and fortunately my PC survived this ordeal with no loss in function. Even that Ethernet port still works with some heavy burn marks on the side of the inner port. The Ethernet cable has metal around the plastic housing, so it looks like it touched metal to metal and grounded something I’m not sure. Anyone know WTH may have happen here though? 2 hours ago, Etern4l said: Bizarre, glad you managed to avoid a disaster. Any PoE switches? 52 minutes ago, Etern4l said: The length might have something to do with it, but it's way off the max supported length (300ft+). Nice riddle. Perhaps some conductive debris got into the socket and caused a short... Edit: way back you'd need a special crossover cable to connect computer to a computer, but it shouldn't matter these days, assuming the other PC is reasonably recent. My initial thoughts were PoE and a cross-over cable issue too but @Etern4l was on the money with those first two questions. There is always the possibility of a surge/short somewhere that went through your system (or the wife's) and grounded out through the port. My next step would be to use a real hub/switch to connect the systems again or place them closer with a shorter run. I see you used the native ports so there was no chance of a PCIe surge through a NIC. 6 Electrosoft Prime: SP109 14900KS | Asrock Z790i Lightning | MSI Suprim X Liquid 4090 | AC LF II 420 | TG 2x16GB 8200 | Samsung 990 Pro 2TB | EVGA 1600w P2 | Phanteks Ethroo Pro | Alienware AW3225QF 32" OLED Heath: i9-12900k | EVGA CLC 280 | Asus Strix Z690 D4 | Asus Strix 3080 | 32GB DDR4 2x16GB B-Die 4000 | WD Black SN850 512GB | EVGA DG-77 | Samsung G7 32" 144hz 32" My for sale items on eBay. Link to comment Share on other sites More sharing options...
johnksss Posted November 8, 2022 Share Posted November 8, 2022 1 hour ago, tps3443 said: Here is the cable, and the burn mark inside the Ethernet port. It was only running from computer to computer. I don’t know how it’s possible, or how it even happen. I just know the cable was heating up like crazy. And so was my motherboard I/O area. It melted the cable, and burned my Ethernet port. It shut off my PC and tripped the breakers of my office and even my kitchen. I had to pull the cable out with pliers, it was literally seized inside the 2.5gbit port. More than likely....water damage some where on the board having to do with the ethernet port. And if you have not been using it for a while, you wouldn't know when it got messed up..... Speculations of course. 5 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Etern4l Posted November 8, 2022 Share Posted November 8, 2022 56 minutes ago, johnksss said: water damage some where on the board having to do with the ethernet port. Firewater may have been involved 😉 "We're rushing towards a cliff, but the closer we get, the more scenic the views are." -- Max Tegmark AI: Major Emerging Existential Threat To Humanity Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 8, 2022 Author Share Posted November 8, 2022 On 10/26/2022 at 8:08 PM, tps3443 said: I got through R23 at 6Ghz P-Cores, 4.5Ghz E-Cores, and 5.1Ghz Cache, with only 1.360V 😃 @365 watts peak ..package temps were still like 80C, imagine this CPU with a delid. Screenshot inbound and coming. I had to power off my PC and let it dry real quick though. 2 hours ago, johnksss said: More than likely....water damage some where on the board having to do with the ethernet port. And if you have not been using it for a while, you wouldn't know when it got messed up..... Speculations of course. Now yeah, that would be possible. Hadn't thought of that. It wasn't that long ago that it might have gotten wet even if it was not evident at the time. That was a lot of condensation on the water block a few weeks ago. 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted November 8, 2022 Share Posted November 8, 2022 25 minutes ago, Mr. Fox said: Now yeah, that would be possible. Hadn't thought of that. It wasn't that long ago that it might have gotten wet even if it was not evident at the time. That was a lot of condensation on the water block a few weeks ago. Where is the picture? 1 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 8, 2022 Author Share Posted November 8, 2022 9 minutes ago, johnksss said: Where is the picture? All of his pictures posted in the thread around that time are gone and have that same thumbnail as a placeholder. I don't know if the image host is down or if they got deleted. That's why I only use imgur and postimg.org. I have images saved 5+ years ago that are still accessible. Photobucket and Imageshack were terrible about deleting images after a while of not being viewed. 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted November 8, 2022 Share Posted November 8, 2022 4 minutes ago, Mr. Fox said: All of his pictures posted in the thread around that time are gone and have that same thumbnail as a placeholder. I don't know if the image host is down or if they got deleted. That's why I only use imgur and postimg.org. I have images saved 5+ years ago that are still accessible. Photobucket and Imageshack were terrible about deleting images after a while of not being viewed. You're right about Imgur though, although they did have a pay to keep your photos at one point if memory serves me right.... From 2008 on imgur. 3 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
tps3443 Posted November 8, 2022 Share Posted November 8, 2022 26 minutes ago, johnksss said: Where is the picture? I don’t think it’s from moisture. One thing that’s strange is, that Ethernet cable that caused this is not one I normally use ever. It has a metal plug housing around it. And that metal was burning against some metal on the inside of the Ethernet port. Not the wires themselves. This metal tab on the right side of the Ethernet port was burning against the metal on the side of the Ethernet cable. Anyways, the motherboard held up under the heat and stress! Nothing broken. That port works just fine. 1 13900KF Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 8, 2022 Author Share Posted November 8, 2022 (edited) 18 minutes ago, johnksss said: You're right about Imgur though, although they did have a pay to keep your photos at one point if memory serves me right.... They may have. I have been using them for so long I can't remember now. Edit: Oh man, what an understatement. I said 5+ years ago and when you mentioned 2008 and showed the photo from back then I got curious. I checked my account and saw things I uploaded as many years ago, LOL. Wow... time flies when you're having fun, and even when you aren't. Edited November 8, 2022 by Mr. Fox imgur use for many years 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted November 8, 2022 Share Posted November 8, 2022 28 minutes ago, tps3443 said: I don’t think it’s from moisture. One thing that’s strange is, that Ethernet cable that caused this is not one I normally use ever. It has a metal plug housing around it. And that metal was burning against some metal on the inside of the Ethernet port. Not the wires themselves. This metal tab on the right side of the Ethernet port was burning against the metal on the side of the Ethernet cable. Anyways, the motherboard held up under the heat and stress! Nothing broken. That port works just fine. Unfortunately that is the standard for 6A cables. Which is what I'm using for my 10G home network with a Unify-X.... Edit: Also using a POE for my company phone with the same cables... 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Clamibot Posted November 8, 2022 Share Posted November 8, 2022 12 minutes ago, tps3443 said: I don’t think it’s from moisture. One thing that’s strange is, that Ethernet cable that caused this is not one I normally use ever. It has a metal plug housing around it. And that metal was burning against some metal on the inside of the Ethernet port. Not the wires themselves. This metal tab on the right side of the Ethernet port was burning against the metal on the side of the Ethernet cable. Anyways, the motherboard held up under the heat and stress! Nothing broken. That port works just fine. That metal sheath around the connector definitely caused a short, causing it to heat up and melt the plastic around it. Did the same thing happen to the other end of the cable, or only the end plugged into your motherboard? This reminds me of the melting 4090 power connector issue. 1 AlienyHackbook: Alienware M17X R5 | i7-4930MX | GTX 1060 | 32GB DDR3L Kingston HyperX @ 2133 MHz CL 12 | MacOS Sierra 10.12.5 | Windows 10 LTSC | Hackintoshes Rule! Desktop Killer: Clevo X170SM-G | i9-10900K | RTX 2080 Super | 32GB DDR4 Crucial Ballistix @ 3200 MHz CL 16 | Windows 10 LTSC | Slayer Of Desktops Sagattarius A: Custom Built Desktop | i9-10900K | RX 6950 XT | 32GB DDR4 G.Skill Ripjaws @ 4000 MHz CL 15 | Windows 10 LTSC | Ultimate Performance Desktop With Cryo Cooling! Link to comment Share on other sites More sharing options...
johnksss Posted November 8, 2022 Share Posted November 8, 2022 1 hour ago, Mr. Fox said: Edit: Oh man, what an understatement. I said 5+ years ago and when you mentioned 2008 and showed the photo from back then I got curious. I checked my account and saw things I uploaded as many years ago, LOL. Wow... time flies when you're having fun, and even when you aren't. Edited just now by Mr. Fox I was going to say....I could of sworn you were around in them early crysis days. With the arguing with Mr Garbage Ninja can't think of his shops name at the moment.. guy.😂😂 Edit: K&N Notebooks was their name. Where the Gateway FX7811 put an ass whoopin' on their Alienware notebooks and the owner was mad! Then we came back with the Sager/Clevo Notebooks and did the same. Ahhhhhhhh, the good ole days!😂 1 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Papusan Posted November 9, 2022 Share Posted November 9, 2022 @johnksss Jufes test the trashcard😄 And he will test it with water block to the boat. Will the Zotac card then be transformed into a water boat ? HaHa 2 "The Killer" ASUS ROG Z790 Apex Encore | 14900KS | 4090 HOF + 20 other graphics cards | 32GB DDR5 | Be Quiet! Dark Power Pro 12 - 1500 Watt | Second PSU - Cooler Master V750 SFX Gold 750W (For total of 2250W Power) | Corsair Obsidian 1000D | Custom Cooling | Asus ROG Strix XG27AQ 27" Monitors | Papusan @ HWBOT | Team PremaMod @ HWBOT | Papusan @ YouTube Channel Link to comment Share on other sites More sharing options...
johnksss Posted November 9, 2022 Share Posted November 9, 2022 44 minutes ago, Papusan said: @johnksss Jufes test the trashcard😄 And he will test it with water block to the boat. Will the Zotac card then be transformed into a water boat ? HaHa Hummm, looks like the trash card is holding it's own with stock cooler. Although I was expecting to see 100C to 30C though. lol 1 1 1 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Papusan Posted November 9, 2022 Share Posted November 9, 2022 Bro Fox. You are not alone seeing this. Btw. Anyon that have saved Intel Extreme Tuning Utility v7.9.0.24 ? The stupids at Intel support will only offer latest version for download. In the old days we could pick whatever version we wanted. 1 "The Killer" ASUS ROG Z790 Apex Encore | 14900KS | 4090 HOF + 20 other graphics cards | 32GB DDR5 | Be Quiet! Dark Power Pro 12 - 1500 Watt | Second PSU - Cooler Master V750 SFX Gold 750W (For total of 2250W Power) | Corsair Obsidian 1000D | Custom Cooling | Asus ROG Strix XG27AQ 27" Monitors | Papusan @ HWBOT | Team PremaMod @ HWBOT | Papusan @ YouTube Channel Link to comment Share on other sites More sharing options...
jaybee83 Posted November 9, 2022 Share Posted November 9, 2022 11 hours ago, electrosoft said: Something to play around with later even though I still have the A380 on the shelf too.... lucky grab! where did u get it? theyre basically sold out pretty much everywhere. keep us updated on your findings. the latest from HUB is that XeSS runs pretty stellar on Intel GPUs vs. green n red teams. 8 hours ago, johnksss said: You're right about Imgur though, although they did have a pay to keep your photos at one point if memory serves me right.... From 2008 on imgur. classic! 😂 i remember benching and tuning my 485M in my Clevo P150HM with Crysis...seems like a lifetime ago. and imgur is the shiz 😋 2 Mine: Hyperion "Titan God of Heat, Heavenly Light, Power" (2022-24) AMD Ryzen 9 7950X (TG High Perf. IHS) / Asus ROG Crosshair X670E Extreme / MSI Geforce RTX 4090 Suprim X / Teamgroup T-Force Delta RGB DDR5-8200 2x24 GB / Seagate Firecuda 530 4 TB / 5x Samsung 860 Evo 4 TB / Arctic Liquid Freezer II 420 (Push/Pull 6x Noctua NF-A14 IndustrialPPC-3000 intake) / Seasonic TX-1600 W Titanium / Phanteks Enthoo Pro 2 TG (3x Arctic P12 A-RGB intake / 4x Arctic P14 A-RGB exhaust / 1x Arctic P14 A-RGB RAM cooling) / Samsung Odyssey Neo G8 32" 4K 240 Hz / Ducky One 3 Daybreak Fullsize Cherry MX Brown / Corsair M65 Ultra RGB / PDP Afterglow Wave Black / Beyerdynamic DT 770 Pro X Limited Edition My Lady's: Clevo NH55JNNQ "Alfred" (2022-24) Sharp LQ156M1JW03 FHD matte 15.6" IGZO 8 bit @248 Hz / Intel Core i5 12600 / Nvidia Geforce RTX 3070 Ti / Mushkin Redline DDR4-3200 2x32 GB / Samsung 970 Pro 1 TB / Samsung 870 QVO 8 TB / Intel AX201 WIFI 6+BT 5.2 / Win 11 Pro Phoenix Lite OS / 230 W PSU powered by Prema Mod! Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 9, 2022 Author Share Posted November 9, 2022 1 hour ago, Papusan said: Bro Fox. You are not alone seeing this. Btw. Anyon that have saved Intel Extreme Tuning Utility v7.9.0.24 ? The stupids at Intel support will only offer latest version for download. In the old days we could pick whatever version we wanted. XTUSetup_7.9.0.24.zip 1 1 1 1 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Papusan Posted November 9, 2022 Share Posted November 9, 2022 9 minutes ago, Mr. Fox said: XTUSetup_7.9.0.24.zip 19.53 MB · 0 downloads Thank you very much bro Fox 🙂 Sometimes I forget to follow up some websites. Intel's software policy is disgusting. Edit. Btw... Is this version the last one before current XTU v7.9.1.3 ? 1 1 "The Killer" ASUS ROG Z790 Apex Encore | 14900KS | 4090 HOF + 20 other graphics cards | 32GB DDR5 | Be Quiet! Dark Power Pro 12 - 1500 Watt | Second PSU - Cooler Master V750 SFX Gold 750W (For total of 2250W Power) | Corsair Obsidian 1000D | Custom Cooling | Asus ROG Strix XG27AQ 27" Monitors | Papusan @ HWBOT | Team PremaMod @ HWBOT | Papusan @ YouTube Channel Link to comment Share on other sites More sharing options...
Mr. Fox Posted November 9, 2022 Author Share Posted November 9, 2022 1 hour ago, Papusan said: Thank you very much bro Fox 🙂 Sometimes I forget to follow up some websites. Intel's software policy is disgusting. Edit. Btw... Is this version the last one before current XTU v7.9.1.3 ? I don't know. Just got lucky that I had it as I normally do not use XTU. Yes, their driver and software policy sucks and is deplorable, just like the Redmond Retards and AMD and NVIDIA. They all suck. The current look and feel of XTU is totally trash. Everything in the UI is bloated to be nice for use by touchscreen smartphone, tablet and modern UI filth for Kool-Aid drinking sissy-boys. Here is a link to an archive with all the versions that I have saved. https://1drv.ms/u/s!AtvVypqAtWDahYkhQ4EyJcoRuUgeGg?e=xIvHEh On 11/6/2022 at 2:31 AM, Mr. Fox said: FYI - stop the nonsense YouTube ads with this awesome Chrome extension... SponsorBlock. It is my Windows substitute for Vanced MicroG on Android. Never wait for a video to play or be interrupted during the video again by advertisements. Here is a link to an archive with installable backups of my Z490 and Z690 Windows 7 drivers. https://1drv.ms/u/s!AtvVypqAtWDahYkldHtAektSLFapLw?e=aLI6HI Remember to spam F8 and select the option disable DSE because some are unsigned. Or, just disable it permanently using an admin command prompt, then run the Test Mode Watermark Disabler script. (The latter is the best way... one and done.) bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit /set TESTSIGNING ON bcdedit.exe /set nointegritychecks on 2 1 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // X870E Carbon | 9950X | 4090 Gaming OC+Alphacool Block | 32GB DDR5-8200 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Etern4l Posted November 9, 2022 Share Posted November 9, 2022 8 hours ago, Mr. Fox said: I don't know. Just got lucky that I had it as I normally do not use XTU. Yes, their driver and software policy sucks and is deplorable, just like the Redmond Retards and AMD and NVIDIA. They all suck. The current look and feel of XTU is totally trash. Everything in the UI is bloated to be nice for use by touchscreen smartphone, tablet and modern UI filth for Kool-Aid drinking sissy-boys. Here is a link to an archive with all the versions that I have saved. https://1drv.ms/u/s!AtvVypqAtWDahYkhQ4EyJcoRuUgeGg?e=xIvHEh Here is a link to an archive with installable backups of my Z490 and Z690 Windows 7 drivers. https://1drv.ms/u/s!AtvVypqAtWDahYkldHtAektSLFapLw?e=aLI6HI Remember to spam F8 and select the option disable DSE because some are unsigned. Or, just disable it permanently using an admin command prompt, then run the Test Mode Watermark Disabler script. (The latter is the best way... one and done.) bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit /set TESTSIGNING ON bcdedit.exe /set nointegritychecks on I tried updating XTU recently, and the garbage OS Windows 11 wouldn't let me because it couldn't find an uninstaller of the earlier version (which probably got deleted by M$'s own system cleanup utility). Whatevs. 1 "We're rushing towards a cliff, but the closer we get, the more scenic the views are." -- Max Tegmark AI: Major Emerging Existential Threat To Humanity Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now