HP Elitebook 8570W - is it still good ? Hardware modifications

[Annihilator]

On 11/17/2025 at 12:04 PM, Daedalus said:

Yep, i got stung for that too. 4x 8gb sticks "DIMISION" not great. branded 1866, clock runs them at 798, so 1600's reclothed with a fancy sticker. Micron chips but three benchtest apps report as 1600. They dont report all detail in CPUz either....

Damn.... 

 

 

 

have similar with my 1866 sticks(2x8GB, 2x4GB) in my M6800, 2x8GB runs at 1866 C10, 2x4GB even at 1866 C10, but put i all 4 in, has fall back to 1600 C11 😒 maybe different ICs, not checked yet but i dont care anyway, got 16GB of 2133 for "cheap"(120 bucks). 😄 

[Daedalus]

12 hours ago, Annihilator said:

 

 

have similar with my 1866 sticks(2x8GB, 2x4GB) in my M6800, 2x8GB runs at 1866 C10, 2x4GB even at 1866 C10, but put i all 4 in, has fall back to 1600 C11 😒 maybe different ICs, not checked yet but i dont care anyway, got 16GB of 2133 for "cheap"(120 bucks). 😄 

I’ll have to try that and see if less sticks pushes the C value up. Using memtest and other programs reports 1600 when they are “meant” to be 1866, but as called out earlier in chat the “fakey” hyperx underperform. 
well done if you got the genuine 2133 stuff I’ve been hunting for a while, only seen the odd stick of 1866

[Annihilator]

31 minutes ago, Daedalus said:

I’ll have to try that and see if less sticks pushes the C value up. Using memtest and other programs reports 1600 when they are “meant” to be 1866, but as called out earlier in chat the “fakey” hyperx underperform. 
well done if you got the genuine 2133 stuff I’ve been hunting for a while, only seen the odd stick of 1866

 

seen another 16GB kit on ebay... but the seller want 500 bucks for it 🤯 its double price of DDR5 😶

 

n atm im looking for a 32GB kit of DDR4 3200 C20, for my 7720 i just got for cheap... 😄 glad they r not rare like the DDR3 2133 ones 😄

[Daedalus]

Finally finished prepping the 980M sink from the mXM “B” part of the 8770w sink. Now gotta cook the 8570w sink to remove the old “A” sink. Heatpipes took ages to wiggle free with the heatgun, will reattach with lower melting point solder

[Daedalus]

Just to add, on the heatsink adventure. Stumbled across this gem for the “A” heatsink but could be utilised on our hybrid solutions

Heatsink heat pipe bridging 

 

in short it’s bonding the cpu and GPU pipes together. Appears to gain a 5 degree drop

[Will]

On 1/31/2026 at 12:34 PM, Annihilator said:

 

seen another 16GB kit on ebay... but the seller want 500 bucks for it 🤯 its double price of DDR5 😶

 

n atm im looking for a 32GB kit of DDR4 3200 C20, for my 7720 i just got for cheap... 😄 glad they r not rare like the DDR3 2133 ones 😄

Just to let you know, I tried running 3200MHz on both the 7710 with an i7-6920HQ and the 7720 with a Xeon E3-1535M v6, but it wasn't possible. I only managed to get the 7710 to boot once with a single stick in a single slot, but it was extremely unstable. Otherwise, it would always throw memory-related LED error codes and fail to POST entirely. Now just out of curiosity: I once saw a listing on Xianyu for a 7720 motherboard with a Xeon E3-1575M v5 (the one with 128MB eDRAM L4 cache) where the seller claimed it ran 3200MHz stably, but I'm not sure if that's actually true.

[Annihilator]

3 hours ago, Will said:

Just to let you know, I tried running 3200MHz on both the 7710 with an i7-6920HQ and the 7720 with a Xeon E3-1535M v6, but it wasn't possible. I only managed to get the 7710 to boot once with a single stick in a single slot, but it was extremely unstable. Otherwise, it would always throw memory-related LED error codes and fail to POST entirely. Now just out of curiosity: I once saw a listing on Xianyu for a 7720 motherboard with a Xeon E3-1575M v5 (the one with 128MB eDRAM L4 cache) where the seller claimed it ran 3200MHz stably, but I'm not sure if that's actually true.

 

will see, its a 7820HQ in it, n its possible u need to push the voltage for the IMC a bit, when u able to boot into windows u can use XTU for it. so possible the seller had a good sample where no adding extra voltage for the IMC was needed.