Bidelloman
-
Posts
247 -
Joined
Content Type
Profiles
Forums
Events
Everything posted by Bidelloman
-
-
Price: 20 euros Condition: Used, perfectly working Warranty: none Reason for sale: not needed anymore Payment: bank transfer if preferred Item location: Italy Shipping: yes, buyer pays it International shipping: yes, same conditions as standard shipping Handling time: as soon as possible, 1 2 working days at best Feedback: - Specification: Clevo x170smg stock heatsink for rtx 20 series cards Proof of ownership:
-
Wow, km is very different then.
-
Both x170 models have display directly connected to the mxm gpu, bypassing the igpu of the processor which is shut down. So running a k or kf matters little. Failing to post like that seems more a memory training issue, unless you can test your gpu with nvidia tools. Bricked bios without any setting being touched is unlikely, despite how horrible windows can be, but yeah, ch341a and reflash can remove that variable.
-
mh, you may find it is helpful and more portable, the standard heatsink, putty, ptm 7950, delidding the cpu and use the rockitcool IHS with some LM, polish / level the heatsinks and get the fans from taobao, those with more finns and as I happily found out, quieter on the ears. Thank you for the PSU's report, so no problems? noise? cables etc
-
11900k in an smg? How do you like the 780w psu? wanted to buy one myself tbh, bringing around the 2 bricks and adapter is annoying
-
[WTB] Clevo MXM RTX3080/3070/3060 for parts/repair
Bidelloman replied to Khenglish's topic in Want to Buy
I got an artifacting 3080mxm and its heatsink for the clevo x170. In case this is still ongoing. -
i wonder if after all this time they are still available, I bought them through that proxy reseller, taobao, from a chinese website. These fans are mentioned in the SMg thread many times
-
well, you could ask chatgpt to make you one
-
you run windows 11? I heard microsoft won't support windows 10 wifi 7
-
been wondering for a while if that was possible, did you simply do a swap of cards? how's the performance?
-
x170's heatsink tolerances are shit, you are far better off using putty and ptm, than sticking with pads. Or do what ztec did, which is LM and k5pro ( sewing off the fourth cpu screw, replace them with 2.5 x10 + washers), bit messier and k5 is less performant than many if not most putties, and with LM you have to be even more careful with tolerances and ofc not touching any conductive bit.
-
You are correct. The pad links 2 pcbs. The m.2s however, I got some heatsinks from the same hybrid watercooler heatsink source. As for your temperature and noise endeavor, I highly suggest cpu delid ptm 7950 and some taobao fans which imo work great and are less noisy.
-
thank you for that chart, I personally gave up trying to find out a damn thermal pad for vram chips that wouldn't thermal throttle my gpu, so now I'm going with a good putty on caps, vram, vrms, mosfets, everything. Would you be able to check the orientation and position of the big thermal pad that sits under the mxm gpu? thank you
-
correct, some applied heat will soften pcm and then you're good to go, could also use a hair dryer on it, few seconds will suffice
-
Is this the correct pad orientation and position?
-
Same as the one I used already, and this now is toast. So probably better to go for a different one.
-
Yeah...this is where mine comes too
-
Anyone here experienced enough with buying a replacement 3080 mxm? I am in need of one and some of those ebay listings seem dodgy.
-
Yeah, only be careful when removing the heatsink, too much pressure or strain and you can damage the cpu or gpu
-
Yeah. Gpu needs changing, since reballing or replacing chips is expensive. Given that this gpu came from a famous listing of used 3080 where most of us got it, I was wondering where, now, I am supposed to get a replacement 3080 mxm. Some ebay listings are marked as "new", but who knows..
-
I am guessing more vram, specifically, but will need to run tests.
-
Guys, what do you think this is? Pc loads everything, but gpu driver does not load in, also hwinfo does not detect much about gpu. Device manager reports gpu driver error. Rest of the pc is useable. I am assuming this is indeed the gpu, or maybe vram?
-
if fans work and temperature takes very little time to get to that point, then it is likely contact issue, caused by either the screws or wrong thermal pads ( either thickness or softness, especially vram ones tend to be picky)
-
Yeah, but I have no use for them. Guess I'll find a way to recycle them somehow
