Talon

This guy does a pretty good job of explaining how to enable it. I've tested in both Superposition and Port Royal and both produced increased performance. Green Goblin holding out.

Ahh damn, you can use Nvidia Inspector to force rebar support in games/benchmarks where Nvidia has not officially enabled support simply by using the profiles.

Add about 10 points to that KS over a K. You lucky SOB! LOL. I hate you. That settles it, I am exchanging this chip in the morning. This is my shitty SP88 KS doing 5.1 with same voltage as you cherry SP98 chip. Ignore the temps, I am using a crap graphite pad for testing and it lets the chip warm up a bit.

That is just on a couple cores. I am using TVB +1 in the BIOS. Under load it was doing 5.3Ghz. The chip does seem decent and am I really happy with the IMC on this chip. Blows my mind how much better it is over my old K. Are you using Resizeable Bar/Forcing it via Inspector? You can pick up a couple hundred points right there. I just learned this trick recently. Benchmarkers hate him. I think I also got pretty lucky in the lottery on this GPU chip. It does 2220-2205mhz locked in the entire run on the freaking air cooler. Of course it's a redesigned cooler with a vapor chamber so that definitely helps.

Best run so far. Had to snag that crown back.

Sorry to hear about your Unify-X. I would not expect same memory tuning that you are getting with that Unify-X though. The 2-dimm boards are king. I wish I had one with this chip now though. I should easily be able to push 7000+ Mhz.

Using a KS right now. I picked it up this morning after getting home from a few days in Phoenix. I didn't get a great chip, SP88 on latest BIOS. 😐 It's better than my SP92 K but not by much from initial testing. I need better cooling though. I can run 5Ghz P cores and 4Ghz E cores synced (yes underclocked) at -100mV and that puts me around 1.066v load and draws 183w Package for around 28.4K CB23. Where this chip looks to shine for me is the IMC. I can boot 7000Mhz CL32 on my Hero board. Previously I topped at 6600Mhz. Now I can run 6800Mhz stable it seems which is crazy for a 4 dimm board. So the IMC does seem to be improved. That said I am likely going back in the morning to grab a different sample. I will keep the best one and return the other. SP88 is already low tier from what I've seen, but K and KS SP scores cannot be compared directly at all.

https://www.tomshardware.com/news/aida64-hints-intels-return-to-hedt-market-with-alder-lake-x HEDT soon?

How much for the 3060 Ti? Also which mATX board?

I did the Ultra. Honestly should have just grabbed the black. They are “binned” according to EVGA Jacob but who know how much binning that is. I will say mine boosts crazy good at stock but that seems to be the case for all Ti chips. My guess is these are the cream of the crop chips from Nvidia to hit the Ti spec. My power consumption is actually really good as well from what I’ve compared to. But for just gaming the Black is the best bet. It’s also a metal black plate. It’s a redesign cooler and card. The vapor chamber is awesome, low memory and die temps in mid 60s for both overclocked. They also used actual thermal pads instead of that crap paste mess. Will make it easier for GPU cooler swap or repaste. This looks awesome. Will try when I get home from a trip.

Punched 16K but still chasing @johnksss crazy bin KPE.

@ryan If you setup your ThrottleStop like this you can set any value into the Long/Short PL2 and PL1 values then hit apply. It will bypass the crap HP "adaptive" power limit crap they use and let you get significantly higher CPU performance. You need to use the Honeywell PTM 7950 stuff to keep it nice and cool though. But these settings will stop it from power throttling down.

https://www.3dmark.com/pr/1507084 Sorry forgot to save/printscreen my result but here is a quick run. Looks about an 18% uplift for the 3070 and the extra 2gb of vRAM is very useful for certain games, especially needed for 1440p. When I picked this up on a sale at $1499, it was a pretty good deal. The 3060 version with FHD and no G-Sync, no per key RGB, was $1300. So the performance increase and the extras made it a really slick deal. I'm not the biggest fan of laptops anymore though. They're neutered BGA crap. If it wasn't for my job and travel I would not own one. I am actually thinking about picking up a thin/light 14" that is sub 4lbs soon that can do some light gaming on the side if needed because I rarely game on overnights anymore. Usually more interested in getting in a good workout, eating and sleeping and the laptop use is usually to browse forums and watch YouTube.

I'll check later to see how it compares.

I have the Omen 16.1" with 3070 115w.. I don't bench it often but will see if I can find a score. I don't watch this guy often but this direct die cooling setup might be interesting for some of you.. The results is actually super impressive. @johnksss @Mr. Fox @electrosoft

I beat the top score 🙂 I get to be 3090 Ti King for a bit lol. https://www.3dmark.com/3dm/73713164 Will do more testing tonight after some actual gaming.

So far absolutely zero whine. I am truly shocked. My KPE also had a bit of whine, but wasn't too bad. So far my opinion is that if you have a 3090 KPE there is 100% reason to upgrade unless you are chasing records and then you need the KPE 3090 Ti. This FTW3 is good, but there is no substitution for the KingPin. https://www.3dmark.com/3dm/73704630 +100/1500Mhz. Bests my 15400 KPE personal best, and that took a lot of tweaking messing around with the classy tool and what not. So I am happy that I can easily just drop in the clocks and beat it. I'll mess around tonight and see if I can break 16,000 but I'm thinking you need water for that. But my 12900K is also stock so I'll see if upping that helps any. All in all I am happy with the card. It's a beast and have the card I wanted from the beginning lol.

https://www.3dmark.com/3dm/73703445 Bone stock CPU and GPU run. Power limits and all sliders at default. Sold my KPE for $1800 cash yesterday. I've wanted to get away from the AIO solution since I got it, I want EVGA to release KPE cards with beefy air coolers made of copper again or just blocked, but I think those days are gone. I got 1 year and 4 months out of my KPE and only lost a few hundred bucks. I used some of my EVGA bucks to 'upgrade' to this. As expected slightly faster than a 3090 KPE at stock, but no mess in the case. Easy pop in and pop out air cooled card. The card ran 2055Mhz during the test around 64c. Again all stock sliders and stock fans. Hard to judge since the power limits are so insanely high and it ran around 430-450w during the test.

I've read/seen videos that have tested this out. You can either enable v-sync in game or in the NV Control Panel. What they recommended was using in Nv Control Panel to ensure the in game v-sync doesn't introduce any kind of additional input lag. As you know, both should have the same effect. You're not actually using V-Sync but by turning on V-Sync it forces the frames to cap around -3 below your max refresh rate to ensure you never leave G-Sync range and keep it buttery smooth. Nvidia does a terrible job of explaining how G-Sync works, it's benefits, and it doesn't help they've changed how it works based on control panel settings over the years. I personally hate gaming on anything that doesn't feature adaptive sync or G-Sync. Having used it since 2015 with my first 1440p Dell G-Sync monitor, I simply can't go without it anymore. I immediately notice tearing and the lack of 'synced up' feel that it provides. I turn it off for benching, but that's about it.

If G-Sync is showing up as an option in the Nvidia Control Panel then you have Adaptive Sync tech available and working as intended. The reason you are seeing not certified as G-Sync compatible is because it's NOT certified by Nvidia as G-Sync Compatible https://www.nvidia.com/en-us/geforce/products/g-sync-monitors/specs/ . As you can see your monitor is not on the official list. That does not mean G-Sync won't work, it just means Nvidia has not certified it. It's possible they haven't gotten to it yet, or more than likely Ben-Q doesn't want to pony up the cash for the branding and testing or Nvidia found small issues with variable refresh rate (flickering is usual issues) and won't certify the panel ever. Go into the Nv Control Panel and turn on G-Sync for both Full Screen and Windowed Modes. Then tick the box that says use G-Sync anyways even though it's not certified or whatever it says. Then download and run this program and ensure G-Sync mode stays ticked. You can also turn it off and on and look at the tearing appear and disappear to ensure it's working. Then go play your games and enjoy. https://www.nvidia.com.tr/coolstuff/demos#!/g-sync

Long time no see! Welcome to the new boards!

That is great! Thanks for confirming! I wonder if it's simply a licensing/fee issue with Nvidia. With AMD and Intel offering FreeSync or VRR in laptops, Nvidia is going to need to start offering G-Sync to more laptops similar to how they did on desktop.

It’s actually 500nit advertised. It’s crazy bright and color accurate. One of their new “Nebula” displays. I’m actually jealous of it, super compact, well built beastly machine.

That is actually good to hear! So you have this laptop? It has the variable refresh option in the Intel iGPU menu? That is definitely good that it has that at least has Optimus VRR, but less than ideal dGPU G-Sync/FreeSync option. My brother just picked up the Asus G14 2022 edition and it has MUX'd FreeSync in dGPU mode which is the ideal way just like GSync.

This. They're also 16:10 16" options. https://www.lenovo.com/us/en/p/laptops/legion-laptops/legion-5-series/legion-5i-pro-gen-7-(16-inch-intel)/len101g0015?visibleDatas=696%3AIntel® Core™ i7 They don't have all of their options out yet with their higher end GPUs but will soon. My HP Omen 16.1" is also Advanced Optimus, MUX'd, and has G-Sync at 1440p 165hz. MSI is just sorta lagging and cheating customers out of options other brands have been offering for awhile now. I'm not saying they need to hit every box, but they should be offering at least some of these new features that other brands are.