MaxxD
-
Posts
312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by MaxxD
-
What should you turn on to make the Prema BIOS X170SM-G machine smoothly carry the RTX 3080 card? I haven't looked at the bios yet, but I'll look over it! 😃 I fixed the zTecpc machine today. Cooling trash, gpu (RTX 2080 Super) trash, screws trash...there are a few more things. The transport company could be football for the package ... and it was sent as a fragile package and insurance. It received aqueous cooling and I9-10900K was put in. Memory is also 2x16GB. SSD is 4x2tb and then...3080 I hope you will go under a basic Prema BIOS!
-
Someone made a huge mistake to use this washer screw solution because he broke the gpu chip corner. It is outrageous that anyone does it!🤔 zTecpc Technical Support confirmed that they also fitted the Clevo X170SM-G version with a spring factory screw.😔
-
As far as I know, the Prema zTecpc X170 version handles the RTX 3080 MXM card without any problems. I hope I get there to try this. ✌️😋
-
I completely agree!☝️ On one machine, the obsidian remains fully and the Control panel. Taking advantage of BIOS on a Prema machine, the full fine tuning is the target water cooling. The only problem now is that during the delivery, the zTecpc X170 is the fixed screw (non spring) heatsink fixation with one heel of 2080 Super) is broken and the other corner is cracked, so it cannot be used.😔 /I made the pictures myself with the help of a digital microscope/ The broken corner is visible to the naked eye! I'm a repair technician, so it wasn't difficult to find out the error. The GPU chip is available with eBay and can be replaced with a fineplacer or free hand. (It's not worth it for me!)😌 I have RTX 3080 cards, but I need to transfer the whole water to cool from the other machine so I can use the zTecpc machine. CPU, RAM, SSD, will be loaded, the PCS X170 will also be appropriate with the I5 CPU with RTX 2080 Super. It's good that the PCS machine is not a basic RTX 20xx card.🙂 This will not be a small operation and it is planned next week. Did others have a similar problem with zTecpc X170 during the (long, nearly 2,000 kilometers) transport? 🤔
-
Thanks! The SM-G (Prema) version and not KM-G. ☺ I guess you wrote it. Do I know the Prema Bios for the full tuning of the machine or do I don't know it?
-
I have a total of 8TB (4x2TB) and what you have in the machine is a lot! What do you store on it? 🤗😆
-
Thank you!😉 Then if I get home and smooth the zTecpc X170, I will look at it and there will be a question. 🤗☺️
-
Thanks! I would be particularly interested in how much BIOS is protected against the low voltage settings. If you have too little value, can you easily repair it, or do it repair it? 😔
-
Hi, The Prema zTecpc X170SM-G BIOS How much user friend and stupid is sure? If, for example, CPU voltage value is too low, is it easy to repair or do you have to have a lot of fun? I would like to know that. I wonder what you say. Thanks! 🙂
-
FTW_260 If I remember correctly, he used it for the wet heatsin and worked very well.☝️🤗🤔
-
Then did I buy this completely unnecessarily for water cooling?🤔😔
-
I assigned such an extra fan party to the water block. Whoever used this has a good opinion? Better than factory fans?
-
For me, the Obsidian (full version) works perfectly. Sometimes I have a problem with it, the GPU temperature display is usually disturbed and after a nV driver update it is no longer a problem.
-
Then it's perfectly good and worth the upgrade to 3080. I read this, thank you! 👏 Although the 2080 Super will be suitable for many years, it will have to make up to a maximum of minor compromises later. ☺
-
I would keep the SM-G version!☝😁💪
-
Prema Bios would be very good for me, but the full obsidian software coverage is good and usable. 😀😋
-
I will do some comparable tests between 2080 Super and 3080. Just get home from the medical hospital and I can stand for the exchange!😁
-
Someone could do a few tests between 2080s and 3080 what is the difference. Or just what the 3080 gpu knows. Little teaser for those who would switch to 3080! ☝💪😁 /3DMark FireStrike, TimeSpy, "Normal & Ultra" etc..etc../
-
The courier brought it today. I was very surprised that he arrived so quickly from thousands of kilometers away. Unfortunately, I have no surprise to try. I'm over a serious surgery, now 3 weeks of rehabilitation / medical hospital awaits me and maybe then. Until then, he rests in his box, Esd's foil. Excellent packaging! 😉😀👍😎
-
Congratulations and I wish you good use! He's on my way and arrives soon. I still have to wait for replacement. They brought home from the hospital today and recovered after surgery. On Friday, they will take full rehabilitation after surgery. I spend 3 weeks there.😬 I knew how good the water cooling on the X170 machine, I wouldn't replace anything...right now!☝️👍☺️😄
-
I just ordered one. I'll give it a try, I hope it works! 😄
-
Failed to execute? Doesn't the forummate answer anyway? I would be interested in the final result... 🤔
-
Pfudaniel: Great silence!🤔 Everything is alright?😄
-
Thanks! I look forward to the further results. Really Plug and Play? 😮
-
Unfortunately, I can't see anything from this. Give me a picture, thanks!
