Jump to content
NotebookTalk

Recommended Posts

Posted
14 minutes ago, GuitarG said:

With good programing skills and ai it may be possible to distill and extract exact reason why 8570w recognized eDP panel fully only with K1000m, as rtx quadro did not (worked but not recognized as internal panel, only as one of DP external monitors). I still think its vbios rom issue.

 

This can also be du to the EDID information on the LCD itself since the LCD communicates witht the GPU on the eDP AUX lanes.

 

For your custom cable, you used micro coaxial cables for the data lines ?

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

Posted
32 minutes ago, GuitarG said:

Yes, DC set eats battery like kids eat candy. 

Red tint, sometimes high pitched noise (had both). Even if one can fight tint with colorimeter, its not worth IMO. 

 

My 40pin cable didnt worked only because my 40pin 4k screen was damaged. It tried to show image few times (text, no tv signal noise static, etc), then went totally blank. Later I tried that lcd on my zbook g9 and, suprise suprise, not working at all. 

 

Maybe one day I will find affordable 40pin screen so I can show you that would work same way as 30pin worked. Only difference is two additional lanes pairs.

 

With good programing skills and ai it may be possible to distill and extract exact reason why 8570w recognized eDP panel fully only with K1000m, as rtx quadro did not (worked but not recognized as internal panel, only as one of DP external monitors). I still think its vbios rom issue.

 

Dunno about red tint, my two DCs (8570w and Zbook 17 G1) don't have it. Maybe it can also be alleviated by applying a different profile on HP Mobile Display Assistant (rare to find on the web if I recall correctly, I have a copy of it attached)?

Coil whine / high pitched noise can be fought very effectively with common superglue.
Only the DC on ZBook had it, I generously doused/infiltrated all coils with superglue and the noise went from annoying to barely perceivable, and only when you hold your ear very close to the screen. Edit/addition: clear nail varnish is also an option.

HP Mobile Display Assistant.zip

Posted

Come to think of it, I still have a Quadro P3000 in storage with the 75W bios on it.
Could drop it into the 8570w with DC (maybe also using the 50W bios to keep temps down) instead of M1000M,
though I am very hesitant to brutalize the board by removing the SATA connector.
I still have this machine in very productive use for administrational purposes for my local football club, mainly used on dock with MST hub and triple monitors (all digital, no VGA). Maybe some time in the future, who knows 🙂 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use