Jump to content
NotebookTalk

ssj92

Member
 View Profile  See their activity

  • Posts

    997

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by ssj92

  1. ssj92
    I'm going to bump up this old thread and ask if anyone has a RTX 4000 vBIOS dump from the HP card? Version doesn't matter, just need whatever came with your card
  2. ssj92
    send me vbios when you can and I will tell you the display config
  3. ssj92
    I'll test a few pascal cards that is unfortunate, so even modifying 1 byte causes code 43?
  4. ssj92
    3080ti 115w: 28,006 fire strike graphics 11,076 timespy graphics NVIDIA GeForce RTX 3080 Ti Laptop GPU GPU - Benchmarks and Specs - Notebookcheck Tech Acer Predator Triton 500 SE review: Slim gaming laptop with RTX 3080 Ti and Alder Lake - Notebookcheck Review 3080 115w: 25,733 fire strike graphics 10,145 timespy graphics NVIDIA GeForce RTX 3080 Mobile GPU - Benchmarks and Specs - Notebookcheck Tech Acemagic Tank 03 gaming PC review: Small mini PC with Intel Core i9-12900H and Nvidia GeForce RTX 3080 GPU also masters current games - Notebookcheck Review ~9-10% performance @ 115w difference, but we don't know if mxm pro cards will be exact same performance. my p5000 is using the vbios everyone uses for precision m6x00 series. it supports both uefi and legacy. I am of course running in full legacy system
  5. ssj92
    Is there anyway to change the outputs in vBIOS? Example changing eDP from DP_C to DP_D etc? Assuming the physical card/connections are supported of course.
  6. ssj92
    I'd get the A5500 personally. HP RTX 4000 isn't working on my M17xR3 eDP PEG. 980M/P5000 work fine, I'll have to see what's going on since it works on SG (980M does not lol)
  7. ssj92
    It will be bios mod, flashable in windows like any other bios update. Currently you can use unlocked bios and use m2000m and most cards in 2nd slot.
  8. ssj92
    can you show me the post. I was under the impression sandy/ivy can't do 64gb on mobile so-dimm but if I can see what they did I can port it possibly
  9. ssj92
    You should be able to do 980M SLI with my mod. M2000M primary is only needed if you're doing Pascal/Turing. AMD Card might be possible too in primary to use Pascal/Turing. Amphere didn't work in 2nd slot but maybe with my bios mod it might work too
  10. ssj92
    yes you're probably right, thinking about it 980m lost backlight at windows login not during boot. anyways, a revised eDP cable probably needs to be made for AW systems.
  11. ssj92
    I will update m18xr1 bios after m17xr3 is done, it should be a simple port. I iwll look at m17xr4/aw 17 r1 after Backlight mod is not needed for windows boot if laptop is posting. 980m first worked with backlight on m17xr3, then i fixed that. using a flashlight i could see barely the screen. I don't see a PN for my cable. eDP mod doesn't work because of mxm slot being too deep
  12. ssj92
    I don't have a P32/42/52 to test but I am 99% sure it'll work. My RTX 4000 comes in 1-2 days so I will see if it sldo works. You need to start a diagnostic. My windows has num lock enabled when getting to the login screen. Also I enabled windows startup sound. These tell me if the computer is actually booting to windows. I've had "black screen no beeps" many times during my testing but the computer wasn't booting to windows. I already fixed PEG and ironically SG had a bug so now I am doing full SG fix. Ironically M17xR3 will surpass R4 if SG is also fixed since R3 can OC XM CPUs lol Actually after SG fix by next plan is M18x overclocking port to M17x (bios)
  13. ssj92
    that's on SG mode. WX7100 runs PEG eDP no bios mods. With bios mod i am running 980M, M3000M, P5000 all on M17xR3 PEG eDP. LVDS works on 980M/M3000M.
  14. ssj92
    I have 1080p 144hz panel in R1. If I bought the whole display assembly for R2 (4K panel). 1) Will the whole assembly fit the R1 (Are the assemblies the exact same)? 2) Will I be able to plug n play the eDP cable from the assembly?
  15. ssj92
    Super excited to try this in the future. my rtx 5000 is 90w. t1000 is 50w.
  16. ssj92
    Yup Dual PEG also constantly has 60w limit with PWR reason. Looks like I have several laptops to test this on. I'm hoping you can figure out the turing quadro vbios as well for your tool so I can increase tdp. flashing 130w lenovo vbios causes code 43 on the hp 90w rtx 5000.
  17. ssj92
    Interesting, this seems easier than the resistor mod someone else here pointed out. Do you think this would also fix the dual PEG power issue? Where we use a SLI laptop to put a working gpu in slot 1 and a non working gpu in slot 2 to get gpu2 to work? The issue with that one is..the gpu always runs 20-30w less than its power limit. (ex 90w gpu runs at 60w). The other question is....does this allow the gpu to exceed its power limit? would a 115w gpu be able to go higher or is that vbios limited?
  18. ssj92
    If you read my A4500 thread you will know flashing dell A4500 vbios allowed the laptop to boot in Optimus but the vbios mismatch causes error 43 in device manager. on my laptop the number lock light turns on when booting to windows. most likely its stuck somewhere due to no lcd detected.
  19. ssj92
    none of the professional cards will work. only the frankenmod 3080/4070/4080/4090 etc. I bought P5000 for more testing on R3. Will try to get RTX 4000 HP as well from the other member. there's no laptop that will work with any pro cards from ada most likely without a proper bios mod
  20. ssj92
    Well if you get a chance, try testing the 4070 or 4090 in the m17xr4 so people will know if it works or not. Which heatsink are you using?
  21. ssj92
    They're different but also similar. For example, 980M doesn't work in SG & PEG in M17xR3/M18xR1. Even Optimus has issues, when I saw RTX 5000 working on such a old platform I knew eDP would work too as long as the card vBIOS/Physical card itself supported eDP. Now I am curious of trying rtx 4000 or 5000 in M17xR3 eDP. If it works in M17xR4, it might work in R3 which would be the fastest card tested so far. So you don't have any eDP cables left for yourself to test 3080 or 4070 in M17xR4?
  22. ssj92
    That's awesome. being able to change TDP on Turing Quadro should help lift performance quite a bit. I have a P4000 in my M6600 in Optimus mode so I can flash it in windows but I also have a spi programmer. Also have a tesla p6 but that card is special, changing anything in its vbios causes it to code 43
  23. ssj92
    I disassembled whole MB, cut the nubs and it still hits the side. Do you have any eDP cables to test yourself? It's not going to work, the cable part where the pins are need to be longer for AW M17xR3/R4 MXM slot. Might just resell them since I have no use outside of AW systems. Yes I've shown RTX 5000 working in M18xR1/R2 so it's only natural it works in M17xR4. https://www.3dmark.com/3dm/115357776? eDP working is great, @TruenoG7 had rtx 3000 in his m17xr4 but mentioned the display would go out after some time. I might put rtx 5000 in my m17xr3 if I can get chicken to make a modified heatsink for r3/r4. If you have any rtx 3080/4070-4090 you can try your backlight cable and see if it works.
  24. ssj92
    any reason we can't use nvflashk to flash unsigned bios? being able to modify turing quadro mxm would be amazing.
  25. ssj92
    Give me your m5000m vbios, I will add GOP for you so it works in UEFI. Regarding RTX 3000 spark....which one was this? It shouldn't have done that unless the laptop wasn't power drained. BTW idk if you guys tested M17xR3/R4 but I cannot get the eDP cable to go in on one side (3.3v side). The MXM port on M17xR3 puts the MXM card in deep, you can't see any pins when the card is in, the cable is still hitting the side of the mxm port despite me cutting off the sides. F9E5bi1.jpeg (3024×4032) I put it in half way onto the pins but no backlight on the card. have you tested any cards using eDP mod on M17xR4?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use