Jump to content
NotebookTalk

jaybee83

Member
 View Profile  See their activity

  • Posts

    2,376

  • Joined

  • Last visited

  • Days Won

    56

 Content Type 

Everything posted by jaybee83

  1. jaybee83
    lets recap: gpu drivers install fine (no error messages), but once installed the internal screen goes blank? but external display still provides an output? have u cleaned up with DDU before installing a different driver? does the internal screen work normally before gpu drivers are installed? what happens if u reboot into safe mode with a gpu driver installed?
  2. jaybee83
    glad to hear, definitely smth to keep in mind for future battery purchases 🙂 also good choice on that 980, its basically the best performing DRAM-less SSD out there.
  3. jaybee83
    10900K laptop wars galore 😁👌🏼
  4. jaybee83
    Clevo itself never offered gpu upgrade kits, this was only done through vendors like eurocom. but the possibility alone to have such a gpu in a socketable form factor would mean that it will at some point be available on the aftermarket and thus to potentially upgrade older machines. edit: re-read your post, so afaik Clevo had already implemented the heatsink capability to accommodate a larger gpu die as found on the 3080 Ti laptop gpu in the X170KM. but yeah, green goblin wouldnt let that happen...
  5. jaybee83
    huh, interesting. thx for the headsup, wasnt aware of the name change! and yeah, Tongfang kinda feels like a new Clevo haha.
  6. jaybee83
    um....im confused. whats the topic of this thread? lol 😅
  7. jaybee83
    about time! 😁👌🏼
  8. jaybee83
    thats ok man, ure doing the best u can. a few hiccups here and there are to be expected. besides, no harm done, wouldve been much worse if the account was hacked!
  9. jaybee83
    not that im aware of @shelf life. im still using the gallinstan ive purchased on ebay in 2017 🙂 dont see a reason why it should be any different with clu or conductonaut... looking forward to ur results!
  10. jaybee83
    likely gpu related, could be defective vRAM.
  11. jaybee83
    hey guys, greetz from my vacay in greece 😄 i found the part number for the 280W brick, in case anyone is interested: Chicony A18-280P1A Since i dont have the machine with me right now, could anyone check the outer diameter of the power plug facing the laptop? @win32asmguy@GT3000 that chicony psu comes in three different flavours, two of which are round barrel type. one is 7.4x5.0 mm outer/inner, the other is 5.5x2.5 mm outer/inner. the NBC review of the raptor x15 actually shows a peak consumption at 260W so im hopeful that connecting the 280W psu will allow the system to draw more power. max ive seen so far was exactly at the 230W limit of the stock psu. in any case, ive already found several different sites where this psu can be sourced from, with prices ranging 100-135€.
  12. jaybee83
    peculiar case!
  13. jaybee83
    haha yep, Roman is the hwbot boss 😋
  14. jaybee83
    that was more towards ur account having been accessed to edit your previous post, thats why i suggested changing ur password 😋 but true, in theory a mod or admin account with post editing privileges might have also been hacked, alternatively. but i would start with securing your own account first.
  15. jaybee83
    agreed, although still not abligatory features yet, moving forward DLSS, RT, etc will only become more wide spread and important. curious to see if AMD's non-Tensor open alternatives will force Nvidia to switch at some point similar to Gsync vs. Freesync previously. in the long run, open source running on regular gpu cores trumps proprietary software running on custom Tensor cores.
  16. jaybee83
    i always leave the profile on performance and then tweak from there via TS, win profile editor, etc.
  17. jaybee83
    i can imagine a potential lure would be more control over privacy, more flexibility on customizations and a truly open system.
  18. jaybee83
    i actually just set a linear custom fan curve and the machine stays super quiet, no worries on that front. and whenever full perf under heavy load is required i switch to full blast Fn+1. for my lady the latter is never really necessary, so shes a happy camper 🙂 for info: i set the fans to only start ramping up at 60C and above, then did a linear curve from 60 to 100C going from 34 to 100% fan speed. so the middle set point between the two ends resulted in 80C with 67% fan speed 😋
  19. jaybee83
    subbed out of interest and tech curiosity. hope this turns out well, would be a shame for such a nice machine to go out.
  20. jaybee83
    160TB writes on that 1TB drive, impressive!
  21. jaybee83
    hum....time to change your passwords 😅
  22. jaybee83
    another system saved from the unnecessary landfill. the beauty of socketed hardware 😁
  23. jaybee83
    sweet intro, love the refurb setup! and no matter what kinda hardware ure rockin, ull find ur corner here at NBT 🙂
  24. jaybee83
    thats a classic! in automotive world that would be an oldtimer haha.
  25. jaybee83
    hell of an intro, welcome back dude 😁👌🏼
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use